ATN ATN NVG7 manual Flipup headset, Helmet mount optional

flipup headset

FITTING THE HEADGEAR

1)Fit the headgear to your head size. Adjust the head­ gear fist before attaching the NVG-7 to it.

2)Loosen all the straps and place the headgear onyour head.

3)Tighten the straps until the headgear fits firmly.

GOOGLES INSTALLATION AND AJUSTMENT

Now you are ready to mount the NVG-7 on to your headgear.

1)Remove the already adjusted headgear from your head.

2)Push button [1] and insert the bracket [2] of the NVG-7 to the rail of the headset.

3)Place the headgear with NVG-7 onto your head.

4)Loosen the screw [3] and move the unit along the rail for eye relief adjustment .

The NVG-7 headset has a flip-up mechanism. Push the button [4] on the side of mount and lift the unit up until the unit fixates in the top position.

Push same button to lower NVG-7 to viewing position.

If you need increase the eye relief of your goggles, you can displace the bracket on the top of NVG-7.

1)Unscrew the screw and detach the end-cap from the bracket of NVG-7.

2)Unscrew the 2 screws and detach the bracket from the NVG-7 body.

3)Turn the bracket 180 degrees.

4)Screw the 2 screws back into place.

helmet mount (optional)

1 3

42

Helmet mount for attachment of ATN’s NVG-7 to a standard PASGT helmet. Helmet mount fits securely onto helmet via a rugged strapping device and grooved hooks. With helmet mount, NVG-7 can be positioned directly in front of user’s eyes or flipped.

INSTALLATION

1)Install the mount onto helmet as shown on the picture.

2)Tighten and fixate the straps [1]

3)Attach goggles to the rail. Push button [2] and insert the bracket of the NVG-7 to the rail of the mount.

4)Place the helmet on your head.

ADJUSTMENT

1)Loosen the screw [3] and move the unit along the rail for eye relief adjustment. Tighten the screw [3].

2)Loosen the top vertical fixation screw [4]. Adjust gog- gle vertical position. Tighten vertical position screw.

2 4 1

3

5 1

3)The NVG-7 helmet mount has a flip-up mechanism. Push a button [5] on the side of mount and lift the unit up till fixation in the top position.