Battery | Picatinny rails | F1:1.4, f112mm |
s | m |
Camera adapter
FEATURES
•Rugged and versatile construction.
•All glass
•Revolutionary F1.4 112 mm lens with amazing light transmission.
•Detachable, most powerful in the industry 450mw Infrared Illuminator with dedicated windage and elevation adjustments .
•Camera/camcorder adaptable for night time pho- tography (optional camera adapter required).
•Weather Resistant.
•Two year warranty (optional extended warranty).
SPECIFICATIONS
Total Darkness Technology | Standard | |
Magnification |
| 4X |
Intensifier Tube |
| High Res. 2nd Gen |
Detection Range |
| 200 m/yards |
Recognition Range | 150 m/yards | |
Lens System | 5 elements, F1:1.4, 112 mm | |
FOV |
| 9° |
Diopter Adjustment | ±5 | |
Resolution |
| 40 lp/mm |
Power Supply |
| One 3 Volt Lithium |
Range Of Focus |
| 5m to Infinity |
Controls |
| Direct |
Battery Life |
| |
Operating Temperature | ||
Dimensions | 335 mm X 100 mm X 110 mm | |
|
| 13” X 3.9” X 4.3” |
Weight |
| 1.58 kg/3.48 lbs |
APPLICATION
The
Objective lens protective cover is intended to protect objective lens from dust and scratches. It also will act as a daylight filter, allowing you to test the scope in daylight or other bright light situations. The pinhole in the center of the pro- tective cover allows a user to check an opera- tion ability of the device in daylight conditions.
NOTE: Do not test the scope in daylight condi- tions even with the daylight filter/lens cap on for more than ten (10) minutes.
OPERATION
•Take the monocular out of the case.
•Install the battery into the housing with the polarity order as shown on the scope. Battery Type: 3 Volt Lithium, #CR123A .
•Slide the switch to turn the unit on with the pro- tective lens cover still attached to the lens. Do not turn the unit on in the daytime without the protective lens cap on . You should see green glow in the eyepiece.
•Observe the scene and adjust the diopter for optimal image clarity. Focus the front lens until the image and the grain are both sharp.
•You may now enter a dark environment or simply shut the lights off in order to darken the room.
•Next, remove the lens cap/daylight filter. Adjust the front lens for distance of the focus. You should not have to readjust the diopter.
NOTE: We suggest that you focus the diopter during daylight with the filter on.
NOTE: The front lens should be readjusted as you view objects at different distances.
•To turn the unit off slide the switch to OFF posi- tion .
The information in this manual furnished for information use only, is subject to change without notice, is not to be construed as a commitment by ATN Corp.
ATN Corp. assumes no responsibility or liability for any errors or inaccuracies that may appear in this book. ©2004 ATN Corp. All right reserved.