4 ©2007 • All rights reserved.
Storm Series In-wall Speakers
Wiring Methodology

There are three common scenarios for connecting speakers to an audio system. Figures 3.2 to

3.4 show stereo pairs, Figure 3.5 shows a Home Theater wiring scheme, and Figure 3.6 shows

passive subwoofer wiring. Figure 3-7 depicts the wiring method when using an A82SW Passive

Subwoofer and two stereo speakers (Sub/Sat confi guration).

A/V Receiver/Amplifier
• Two separate 2 conductor speaker wires run from the A/V Receiver
or amplifier to each stereo speaker.
+
-
+
-
+
-
+
-
Figure 3.2 - Wiring: Amplifi er to Speakers-2 Conductor Direct
• One 4-conductor speaker wire runs from the amplifier to a splice near
one speaker. A 2-conductor wire runs from the splice to each speaker.
A/V Receiver/Amplifier
+
-
+
-
+
-
+
-
Splice
4
Conductor
Wire
2
Conductor
Wire
Figure 3.3 - Wiring: Amplifi er to Speakers-4 Conuctor to 2 Conductor
Volume
Control

• One 4 conductor speaker wire runs from the amplifier to a stereo

volume control, then one 2 conductor speaker wire runs to each

stereo speaker.

+
-
+
-
+
-
+
-

A/V Receiver/Amplifier

4
Conductor
Wire
2
Conductor
Wire
Figure 3.4 - Wiring: Amplifi er to Speakers w/ Volume Control