ATTO Technology attotech.com, F i b r e C h a n n e l, ATTO FibreBridge 1290E, Management

attotech.com ATTO FibreBridge™ 1290E

Fibre Channel and SCSI

Fibre Channel Interface:

•2-Gigabit (400 MB/sec. in full-duplex mode)

•Backward compatible with 1-Gigabit devices

•One (1) SFP (Small Form Factor Pluggable) port

•Full support for direct connect for F-port fabric switches

•Class 2, Class 3 and Intermix ANSI Fibre Channel Specifications

•PLDA, public loop login (NL_ports) and fabric connect (N_port)

•Full-duplex transmissions

SCSI Interface:

•Two (2) independent VHDCI 68-pin SCSI connectors

•LVD Ultra160 SCSI – 160 MB/sec. max per bus

•Backward compatible with all Single- ended SCSI devices

•128 LUNs per channel

Performance:

•Up to 5000 I/Os per sec.

•Up to 160 MB/sec. sustained data- transfer rate

•Memory: 128 MB of SDRAM for advanced data buffering and performance

•Supports Tagged Command Queuing

•Support for 4 concurrent XCOPY commands

Fibre Channel Compliance:

•ANSI FC-AL

•SNIA Extended Copy

•Class 2, Class 3 and Intermix

•FCP-1 and FCP-2 Fibre Channel Specifications

Management

Device Management Physical Interface:

•In-band (through Fibre Channel)

•Serial through 10-pin serial headers

•Network through 10/100 BaseT Ethernet Port (Telnet, FTP and SNMP)

Device Management User Interface:

•Command Line Interface (CLI)

•ASCII-based menu system

•ATTO ExpressNAV™ web-based integrated management console

•Performance reporting and Error Logging (CLI commands)

LEDs:	Configuration:
• FC Activity	• Single (embedded) PCB
• 2-Gigabit Operation	Airflow:
• SCSI Activity Port 1, 2
• Ready	• Recommended 200 LFM
	• Ambient air not to exceed 40ºC
Environmental and Physical
Characteristics	Other
Dimensions:	Operating Systems Supported:
• 4.450” W	• Operating system independent
• 7.600” L

Operating Environment:

•Temperature: 5 - 40º C

•Humidity: 10 - 90% non-condensing

•User configurable integrated thermal sensor data for auto shutdown

•Default: 70º C (max)

Power:
• Input
6-pin:	Max 1.5A @ 12V
	Max 0.5A @ 5V
	20.5 Watts
PCI connector: Max: 3.5@5V
	17.5 Watts
• Power through PCI card form factor or
6-pin power connector
(standard 4-pin connector available)
		Figure 1 - FibreBridge 1290E
	SCSI ASIC	On-Board

Processor

Ready LED

RS45 Ethernet

Connector

SCSI Port 1 &

Port 2 Activity

LED

SCSI Ports 1 & 2

FC Activity &

2-Gig Operation

LED

SFP Fibre Channel

Connector

FC ASIC	PCI Connector	PCI/6-Pin	6-Pin Power	10-Pin
	(Power Only)	Power Jumpers	Connector	Serial
				Header

F i b r e C h a n n e l

©2005 ATTO Technology, Inc. Specifications subject to change without notice. Rev 9/05