ATTO Technology iPBridgeTM 1550E, Power Behind the Storage, Appliance, Technical Specification

iPBridgeTM 1550E

Appliance

Gigabit Ethernet and SCSI
Gigabit Ethernet Interface	• 10/100/1000 Gig-E RJ45 Ethernet port
	• Supports IP v.4
	• Compliance with IEEE802.3ab Gig-E
	• Compliance with IEEE 802.3x Flow Control
	• SNMP MIB 2 support
	• Supports 9K Jumbo Ethernet frames
SCSI Interface	• Single 68-pin SCSI connector
	• Ultra320 LVD SCSI—320 MB/sec. maximum throughput
	• Backward compatible with all single-ended SCSI devices
	• Supports SCSI-3 specifications
Management
Operating Environment	• Operating system independent
	• Supports all SCSI devices including hard disk drives, tape drives, RAID controller, DVD, MO and CD libraries
Local and Network Management	• ExpressNAVTM integrated management console for remote configuration, management and diagnostic
	capabilities
	• Command line management access via Ethernet and RS232
	• Local diagnostics supported through SNMP, Telnet, and FTP
	• Includes support for DHCP, ICMP, and RMON
	• Built in memory has ECC detection and correction
	• User accessible reset switch
	• Built-in watchdog timer
	• Automatically detects and maps all connected devices at power on
Agency Approvals
Safety and Environmental	• RoHS Compliant
Environmental & Physical Specifications
Configuration	• Embedded Board
Dimensions	• Embedded Board: 4.4” W x 6.4” L
Operating Environment	• Temperature: 5-40° C
	• Humidity: 10-90% non-condensing
Power	• Standard 4 pin power connector, 12V, 1.5A
	• Nominal power consumption: 1A @ 12V
Weight	• 1.5 lbs
Ordering Information
Model Number	• IPBR-1550-ER0

Technical Specification	Power Behind the Storage
iPBridgeTM 1550E
©2008 ATTO Technology, Inc. Specifications subject to change without notice

For More Information:

www.ATTOTech.com

or to Purchase:

www.ATTOStore.com

(716) 691-1999

Rev 1/08