ATTO Technology manual attotech.comATTO FibreBridge 2350C, F i b r e C h a, n n e l, Other

attotech.comATTO FibreBridge™ 2350C

Fibre Channel and SCSI

Fibre Channel Interface:

•2.125-Gigabit (400 MB/sec. in full-duplex mode)

•Backward compatible with 1.0625-Gigabit devices

•One (1) SFP (Small Form Factor Pluggable) port

•Full support for direct connect to F-port fabric switches

•Class 2, Class 3 and Intermix ANSI Fibre Channel Specifications

•Fibre Channel support for FC-AL, PLDA and public loop login

•Full-duplex data transmissions

SCSI Interface:

•Two (2) independent VHDCI

68-pin SCSI connectors

•LVD Ultra3 SCSI – 160 MB/sec. max per channel

•Backward compatible with all Single- ended SCSI devices

•128 LUNs per channel

Performance:

•Over 7,000 I/Os per sec.

•Up to 209 MB/sec. sustained data-transfer rate

•Memory: 128 MB for advanced data buffering and performance

•Support for 8 concurrent XCOPY processes

Fibre Channel Compliance:

•Single bit error detection and correction (ECC)

•Multi-bit error detection

•ANSI FC-AL

•SNIA Extended Copy

•Class 2, Class 3 and Intermix

•FCP-1 and FCP-2 Fibre Channel Specifications

LEDs:

•FC Activity

•FC Link

•SCSI Activity Port 1, 2

•Ready

•Fault

Environmental and Physical Characteristics

Dimensions:

•6.193” W

•6.299” L

Operating Environment:

•Temperature: 0 - 40º C

•Humidity: 10 - 90% non-condensing

Power:
• Input:	3.5A@5V

•Power provided: cPCI connector or Custom 6-pin connector

Configuration:

• Single (embedded) PCB

Figure 1 - FibreBridge 2350C

Fault LED

Ready LED

RJ-11 Serial

Connector

Airflow:

•Recommended 250 LFM

•Ambient Air not to exceed 40ºC

Other

Operating Systems Supported:

• Operating system independent

SCSI ASIC

On-board

Processor

Management

Device Management Physical Interface:

•In-band (through Fibre Channel)

•Serial through RJ-11 serial port

•Network through 10/100 BaseT Ethernet Port (Telnet, FTP and SNMP)

Device Management User Interface:

•Command Line Interface (CLI)

•ASCII-based menu system

•Performance reporting and Error Logging (CLI commands)

•ATTO ExpressNAV™ integrated management console

RJ-45 Ethernet

Connector

SCSI Port 0 &

Port 1

Activity LED

SCSI ports

0 & 1

FC Activity &

Link

LED

SFP Fibre

Channel

Connector

FC ASIC

Power LED

Optional

Power

Connector

cPCI

Power

Connector

Event-log Battery

Backup

F i b r e C h a

n n e l

©2005 ATTO Technology, Inc. Specifications subject to change without notice. Rev. 7/05