ATTO ExpressPCI FC 3322
Hardware Specifications
Fibre Channel Interface:
•
•400 MB/sec. per channel throughput in
•Auto negotiation between
•
•Supports all Fibre Channel topologies
•
•Arbitrated Loop
•Direct Fabric/Switch Attach
•Flash ROM for easy field upgrades
•Supports the following ANSI Fibre Channel standards:
-
•Simultaneous
Advanced FC Features:
•Support for SNIA HBA API
•Supports Target and Initiator Modes
Dimensions: |
|
• Low Profile |
|
form factor: | 2.5” x 6.521” |
Operating Environment: | |
• Temperature: | |
• Humidity: | |
Power: | 1.75 Amp @ 5 Volts (max) |
PCI Signal Compatibility: | |
| 3.3 Volts/5 Volts universal |
Airflow: | 100 LFM (min.) |
Fibre Channel Host Adapter Selection Chart
Configuration:
•Easy to install connection plate with LEDs to monitor link,
Advanced
• Large command FIFO |
• Asynchronous I/O support |
• ASPI compatible |
| ||
| Adapters | |
|
• Support for multiple block sizes |
Accelerated PCI Bus Management:
•64/133
•Supports PCI 2.2 and 99 specifications
•Supports
Software Specifications
Driver Support:
•Windows® 2000
•Windows XP
•Windows 2003
•Linux
Advanced Data Streaming (ADS™):
•Improved PCI system bandwidth use
•Optimized FC and
•RISC processor for high performance
•Supports
PRODUCT FEATURES
Number of FC Channels
Maximum Transfer Rate (MB/sec.)
Fabric & Loop Support
Cable Distances
33 MHz PCI Compatible
66 MHz PCI Compatible
Optical/Copper Interface
Class
RAID Support
Windows® 2000/XP/Server 2003
Solaris, Linux
Mac® OS and Mac OS X Support
* per channel
4 | 2 | 2 | 1 | 1 |
400* | 400* | 400* | 400 | 400 |
• | • | • | • | • |
• | • | • | • | • |
• | • | • | • | • |
500M | 500m | 500m | 500m | 10m |
• | • | • | • | • |
• | • | • | • | • |
133MHz 133MHz |
| 66MHz | 66MHz | |
SW LC SFP | SWLC SFP SW LC SFF FixedSWLC | HSSDC | ||
2,3 | 2,3 | 2,3 | 2,3 | 2,3 |
• | • | • | • | • |
• | • | • | • | • |
• | • | • | • | • |
| Linux | Linux | • | • |
|
| OS X | • | • |
F i b r e C h a n n e l
©2003 ATTO Technology, Inc. Specifications subject to change without notice.