Operating Modes, Programming | Aube Technologies TH102D

2.3 Proportional or ON/OFF heating control

This thermostat has been factory set to proportionally control electric baseboards, radiant systems and convectors. Since proportional control uses a fast commutation rate, it is not compatible with fan equipped systems (see characteristics). Also, this control mode could occasionally create light flickering, especially in rural area.

You can change the control mode to make it compatible with fan equipped systems or to eliminate the light flickering.

To do so, maintain MIN button pressed down as RESET button is being pressed on and released. Then release MIN button. Following this operation, the display will show the fan indicator. To return to proportional control, repeat the same operation.

3) Memory backup

In the event of a power failure, an internal circuit will maintain the programming. The display will stay on for 15 minutes. An indicator "LP" will be shown on the display. Beyond this period, the display will turn off. Only the time will have to be set if power failure is more than six hours. The thermostat will return to the same operation mode as set before the power failure.

ECONO

The ECONO mode has two (2) programs in which the day, the time and the setpoint has to be programmed. For instance, this operating mode can be used for a cottage installation where the user goes only on weekends.

Program 1: Friday 3:00 PM, 20 °C

Program 2: Friday 8:00 PM, 15 °C

The temperature will be maintained at 20 °C Friday from 3:00 PM to 8:00 PM, and maintained at 15 °C the rest of the week.

This gives you a comfortable temperature at your arrival and if you are not going to your cottage for the weekend, there will be only a minimal heating period.

To see the ECONO programs, select the ECONO operating mode and press on PGM button successively to see programs 1 and 2 appear on the display. In

ECONO mode, pressing on the or displays the temperature setting.

4) First power-up

When power is applied for the first time, the display must show the day and hour as follows:

0:00 MO (Monday)

The active operation mode is the framed MAN mode, the temperature setpoint is 20 °C and the ambiant temperature is displayed.

If the display is different, maintain PGM button pressed down as RESET button is being pressed and released. Then release PGM button.

500 WATTS OR LESS INSTALLATION

During the 30 minute period following the installation or a long power failure (more than 6 hours), the light intensity of the display decreases when a button is pressed on while the thermostat is in the heat mode. This problem will disappear when the accumulator for the memory backup will be charged.

OPERATING MODES

The TH102D thermostat has three (3) operating modes:

AUTO, MAN and ECONO.

They are selected through the MODE button. On display, the active mode is framed. The frame moves on to the next mode each time the MODE button is pressed on.

PROGRAMMING

1) Adjustment of time and day

Example of setting: Thursday 8:15 AM

Use DAY, HOUR and MIN buttons to set the time.

Once set, press on RET button to exit the time and day adjustment mode

Note 1 : Time indicator is showing you that the time must be set.

Note 2 : The thermostat has an automatic return. When such functions as time recording, programs recording, etc., are not completed by pressing on RET button, the thermostat will automatically exit the mode after 60 seconds.

2) Typical suggested programs

AUTO

MAN

The AUTOmatic mode runs in sequence (hourly) the programs recorded by the user.

Pressing on the or displays the temperature setting and the SETPOINT indicator for five (5) seconds.

To see the weekday and weekend programs, select the AUTO mode and press successively on PGM button to see the programs appear on the display.

The MAN mode allows the user to override the programming.

The first time the or is pressed on, the tempera- ture setting is displayed. For all subsequent times pressed on, the temperature setting will change 1 °C.

This thermostat can store up to four (4) daily programs for weekdays and four (4) daily programs for the weekend. Also, there is two (2) programs for the ECONO mode. To practice programming use the following example.

Program number	Time	Temperature setting

Weekday programs (Mon...Friday)
Program 1	6:30 AM	20 °C

Program 2	8:30 AM	15 °C
Program 3	4:30 PM	20 °C
Program 4	11:00 PM	15 °C
Weekend programs (Sat & Sun)
Program 1	7:00 AM	20 °C

Program 2	8:30 AM	15 °C
Program 3	4:30 PM	20 °C
Program 4	11:00 PM	15 °C

ECONO mode programs (weekend cottage)
Program 1	Friday 3:00 PM	20 °C
Program 2	Friday 8:00 PM	15 °C

720-102002-A 2/4

TH102D specifications

Aube Technologies, a prominent player in the field of temperature control solutions, presents the TH102D, an advanced digital thermostat designed for precise temperature regulation in residential and commercial applications. This innovative device combines state-of-the-art technology with user-friendly features to enhance the comfort and efficiency of heating and cooling systems.

One of the standout features of the TH102D is its advanced programmable functionality. Users can easily set different temperature profiles for weekdays and weekends, allowing for optimal management of energy consumption. The built-in scheduling capabilities enable users to tailor heating or cooling to their specific needs, ensuring maximum comfort while minimizing energy costs.

The TH102D also boasts an intuitive digital display, which provides clear and easy-to-read temperature information. This feature simplifies temperature adjustments and allows users to monitor their settings at a glance. The interface is designed for both functionality and convenience, offering an effortless user experience.

Additionally, the TH102D incorporates Aube's innovative temperature control algorithms, which continuously assess the room's temperature and adjust the system's output accordingly. This ensures a stable indoor climate by eliminating temperature fluctuations and providing a more consistent environment.

Moreover, the thermostat is compatible with a wide range of HVAC systems. Whether for electric heating, hydronic heating, or central air conditioning, the TH102D integrates seamlessly to enhance system performance. Its versatility makes it an ideal choice for diverse applications, catering to varying heating and cooling requirements.

Energy efficiency is another hallmark of the TH102D. By optimizing heating and cooling cycles based on the programmed schedule, the thermostat helps reduce overall energy consumption. This not only lowers utility bills but also contributes to a more sustainable environment.

For installation and maintenance, the TH102D is designed with user convenience in mind. The product includes a straightforward installation process, accompanied by comprehensive instruction manuals that guide users through setup. In addition, its durable construction ensures longevity and reliability in any setting.

In summary, the Aube Technologies TH102D digital thermostat is a powerful tool for enhancing temperature control in both residential and commercial environments. With features such as programmable settings, an intuitive display, compatibility with multiple HVAC systems, and energy-saving capabilities, the TH102D stands out as a top choice for those seeking comfort and efficiency in temperature management.

Aube Technologies TH102D manual Operating Modes, Programming

Models: TH102D