sOperating Modes
Automatic - The temperature is set according to the
schedule. To place the thermostat in this mode, press Mode until 
is dis- played. The icons of the current period and preset temperature are also dis- played.
Temporary Bypass: If you modify the setpoint (by pressing the 
, 
,
or 
button) when the thermostat is in automatic mode, the new set- point will be used until the end of the current period. When the next period starts, the temperature set for that period becomes the new set- point.
Manual - The
nPress Mode until 
is displayed.
oSet the temperature using the 
, 
, 
or 
button.
Vacation - The thermostat is set to the Vacation temperature. Press
both 
and 
buttons simultaneously to place the thermostat in Vacation mode.
tEnergy-saving Schedule
The schedule consists of 4 periods per day which represents a typical week day. You can program the thermostat to skip the periods that do not apply to your situation. For example, you can skip periods 2 and 3 for the weekend.
Period | Description | Associated preset temperature |
Away from home
Return home
Sleep
The Comfort ( 
) temperature is used in periods 1 and 3 and the Economy
( 
) temperature is used in periods 2 and 4. For example, when the period changes from 1 to 2, the setpoint automatically changes from Comfort setting
( 
) to Economy setting ( 
).
You can have a different program for each day of the week; i.e., each period can start at different time for each day of the week. The thermostat has been programmed with the following schedule.
Period | Setting | MO | TU | WE | TH | FR | SA | SU |
|
|
|
|
|
|
|
|
|
|
| 6:00 | 6:00 | 6:00 | 6:00 | 6:00 | 6:00 | 6:00 |
|
| AM | AM | AM | AM | AM | AM | AM |
|
| 8:00 | 8:00 | 8:00 | 8:00 | 8:00 | ||
|
| AM | AM | AM | AM | AM | ||
|
|
|
| |||||
|
| 6:00 | 6:00 | 6:00 | 6:00 | 6:00 | ||
|
| PM | PM | PM | PM | PM | ||
|
|
|
| |||||
|
| 10:00 | 10:00 | 10:00 | 10:00 | 10:00 | 10:00 | 10:00 |
|
| PM | PM | PM | PM | PM | PM | PM |
To modify the schedule:
nPress Pgm to access the programming mode. Period 1 is selected.
oPress Day to select the day to program (hold for 3 seconds to select the entire week).
pPress Hour and Min to set the start time of the selected period, or press Clear if you want to skip the period
qPress Pgm to select another period, or press Day to select another day. Then repeat step 3.
rPress Mode to exit the programming mode.
NOTE: If no button is pressed for 60 seconds, the thermostat will automati- cally exit the programming mode.
u Troubleshooting
Problems | Solutions | |
The thermostat’s screen is blank. | The thermostat’s switch is on Standby. | |
|
| |
LO is displayed. | The measured temperature is below 0°C | |
(32°F). Heating is activated. | ||
| ||
|
| |
HI is displayed. | The measured temperature is above 50°C | |
(122°F). | ||
| ||
The wrong time is displayed. | The thermostat was without power for | |
more than 2 hours. | ||
| ||
|
| |
The measured temperature is wrong. | The thermostat is located in a spot | |
exposed to an air draft. | ||
| ||
|
| |
The heater is always On. | Bad installation | |
|
| |
The thermostat indicates that heating is On | Bad installation | |
but the heater is not On. |
| |
The temperature does not change accord- | Check that the thermostat is in Automatic | |
ing to the | mode. Check also the | |
schedule and clock settings. | ||
| ||
|
|
vTechnical Specifications
Power: 240 Vac, 50/60 Hz
Load: 16.7 A maximum (resistive only)
Power: 4000 watts (NI) @ 240 Vac
Display range: 0°C to 60°C (32°F to 140°F)
Display resolution: 0.1°C (0.1°F)
Setpoint range: 5°C to 30°C (40°F to 86°F)
Setpoint interval: 1°C (1°F)
Storage:
Approvals: CSA/UL
Data backup: In the event of a power failure, most settings are saved. Only the time must be
;Warranty
Aube warrants this product, excluding battery, to be free from defects in the workmanship or materials, under normal use and service, for a period of three (3) years from the date of purchase by the consumer. If at any time during the warranty period the product is determined to be defective or malfunctions, Aube shall repair or replace it (at Aube's option).
If the product is defective,
(i)return it, with a bill of sale or other dated proof of purchase, to the place from which you purchased it, or
(ii)contact Aube. Aube will make the determination whether the product should be returned, or whether a replacement product can be sent to you.
This warranty does not cover removal or reinstallation costs. This warranty shall not apply if it is shown by Aube that the defect or malfunction was caused by damage which occurred while the product was in the possession of a consumer.
Aube's sole responsibility shall be to repair or replace the product within the terms stated above. AUBE SHALL NOT BE LIABLE FOR ANY LOSS OR DAMAGE OF ANY KIND, INCLUDING ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING, DIRECTLY OR INDIRECTLY, FROM ANY BREACH OF ANY WARRANTY, EXPRESS OR IMPLIED, OR ANY OTHER FAILURE OF THIS PRODUCT. Some provinces and states do not allow the exclusion or limitation of incidental or consequential damages, so this limitation may not apply to you.
THIS WARRANTY IS THE ONLY EXPRESS WARRANTY AUBE MAKES ON THIS PRODUCT. THE DURATION OF ANY IMPLIED WARRANTIES, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, IS HEREBY LIMITED TO THE
This warranty gives you specific legal rights, and you may have other rights which vary from province or state to another.
Customer Assistance
If you have any questions about the product installation or operation, or concerning the warranty, contact us at:
705 Montrichard
Canada
Tel.: (450)
Fax: (450)
Email: aube.service@honeywell.com
For more information on our products, go to
www.aubetech.com
As an ENERGY STAR® partner, Aube Technologies has determined that this product meets the ENERGY STAR guidelines for energy efficiency.
TH110 | 2/6/05 | 2/2 |
