PB112-024T-15S

Installation Instructions

24 V Low-Voltage Power Base

nApplications

The PB112-024T-15S power base can be used on any TH11x series thermostat (with the exception of the TH110 model). This low-voltage power base operates on 15-second cycles and can be connected to a line-voltage load using a solid-state relay. The PB112-024T-15S is compatible with most solid-state relays; however, the following Aube relays are optimized for use with this power base:

sInstall the control module onto the base. t Apply power to the heating system.

uVerify the installation by checking that the heating system can be turned on or off using the thermostat.

4.1Single SSR with Built-in Transformer

•RT850 solid-state relay (SSR)

•RT850T solid-state relay (SSR) with built-in 24-V transformer

WARNING

This power base MUST be used ONLY with solid-state relays. The use of electromechanical relays will result in reduced life expect- ancy and in the possibility of overheating of these devices.

Electrical

 

 

 

Panel

Blue

Red

 

 

 

 

 

Black

Heater

oSupplied Parts

nOne (1) power base o Two (2) plastic anchors p Two (2) mounting screws

pInstallation Guidelines

For a new installation, choose a location about 1.5 m (5 ft.) above the floor.

The thermostat must be installed on an inside wall facing the heating system (except for floor heating systems).

4.2Multiple SSRs with External Transformer

Electrical

Panel

 

Black

External 24 V

 

 

Transformer

Heater

Red

 

 

 

Black

Avoid locations where there are air drafts (top of staircase, air outlet), dead air spots (behind a door), direct sunlight or

Heater

Red

concealed chimney or stove pipes (except for floor heating systems).

qInstallation Procedure

The installation must be carried out by an electrician and com- ply with local electrical codes.

nTurn off power to the heating system at the main electrical panel to avoid electrical shock.

oWire the base according to your application. See typical wiring diagrams in sections 4.1 and 4.2.

p For a floor heating system installation, con- nect the floor sensor between the S and R ter- minals.

qSecure the base to the wall using the provided screws and wall anchors.

rConfigure the switches located on the control module (if any). Refer to the user guide.

rTechnical Specifications

Maximum load: 0.5 A / 24 VAC

Heating cycle length: 15 seconds

Operating temperature: 32°F to 122°F (0°C to 50°C)

Storage: -4°F to 122°F (-20°C to 50°C)

Size (H • W • D): 124 x 70 x 23 mm (4.89 x 2.76 x 0.91 in)

Wire gauge: 14 to 22 AWG

PB112-024T-15S

400-112-024-A

18/1/06

1/1

Page 1 Page 2
Page 2
Image 2
Aube Technologies TH116 A/F/AF Applications, Supplied Parts, Installation Guidelines, Installation Procedure
Page 1 Page 2

TH116 A/F/AF specifications

Aube Technologies TH116 A/F/AF is a sophisticated line of programmable thermostats specifically designed to enhance the comfort and efficiency of home heating systems. This series is well-suited for a range of heating technologies, including electric baseboards, convectors, and in-floor heating systems. Aube Technologies is renowned for its commitment to innovation and precision, integrating advanced features into their products to provide users with greater control over their indoor environments.

One of the main features of the TH116 A/F/AF is its user-friendly interface. It features a large, easy-to-read display that allows for effortless programming and adjustments. The intuitive navigation aids in setting desired heating schedules, ensuring that occupants can easily adapt their environment to their specific needs. With the ability to program multiple heating periods throughout the day, users can optimize energy usage, leading to significant savings on energy bills.

The TH116 A/F/AF series also includes advanced technology with its adaptive control capabilities. This feature enables the thermostat to learn the user’s heating preferences and adjusts accordingly, providing consistent comfort while maintaining efficiency. The thermostat’s built-in sensors monitor the room temperature and compare it to the setpoint, making real-time adjustments to ensure optimal heating performance.

Another notable characteristic is its versatility. The TH116 A/F/AF can handle a variety of heating applications, making it an ideal choice for diverse home settings. The units are designed for simple installation and replace traditional thermostats with ease. This makes it an attractive upgrade for homeowners looking to modernize their heating controls without extensive renovations.

Aube Technologies’ commitment to energy efficiency is also a key selling point for the TH116 A/F/AF. By utilizing programmable features and adaptive learning technology, users can minimize energy consumption while enjoying personalized comfort. This not only benefits the environment but also aligns with modern energy-saving initiatives.

In conclusion, the Aube Technologies TH116 A/F/AF stands out in the programmable thermostat market due to its combination of user-friendly controls, adaptive technology, and versatility across various heating systems. Homeowners seeking a reliable, efficient, and easy-to-use thermostat will find this series an ideal solution for enhancing both comfort and energy efficiency in their living spaces.
Top Page Image Contents