Aube Technologies TH133-15S manual o Installation, n Description, Electronic Thermostat, tions

			TH131-15S & TH133-15S
				User Guide
				Electronic Thermostat
WARNING		o Installation
This thermostat provides fast-cycling control and MUST therefore
be used ONLY with solid-state relays. The use of electromechani-		Control Module
cal relays will result in reduced life expectancy and possibility of
overheating of these devices.
TH131-15S
Pilot wire indicator	Heating indicator
(Europe only)
	On/Off switch
				Power Base
	Temperature	NOTE: Keep the thermostat's air vents clean and free from obstruc-
	selection dial
		tions.
TH133-15S		p Configuration
		3.1	Application Types
			Type	Switch Position
			A	UP (A/AF)
			AF	UP (A/AF)
			F	DOWN (F)
Front View	Rear View	Position the switch, on the back of the control module, according to
NOTE: Even if the following illustrations show the TH131 model only,		your application.

they can also apply to the TH133 model.

n Description

This user guide covers the following thermostat models:

•TH131-15S A/F/AF

•TH133-15S A/F/AF

The TH131-15S model is designed for residential applications,		3.2	Minimum and Maximum Limits (TH131-15S only)
whereas the TH133 model is designed for public areas as its controls		Use the two potentiometers on the
are hidden and thus protected against unauthorized access. Both		back of the control module to set		notches
models can be configured for the following applications:		the minimum and maximum tem-
		perature limits. Depending on your
Type	Application	application, the potentiometers
		limit the following temperature:
A	Controls the ambient (room) temperature
			ambient temperature (A)
F	Controls the floor temperature
			floor temperature (F or AF)
AF	Controls the ambient temperature and limits the floor temperature
		Use a flat-tip screwdriver to rotate
		the potentiometers until the notch
		points to the desired temperature
		limit.

TH131-15S & TH133-15S 400-131-022-A 1/11/06 1/2