4.

Configuration

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

4.1

Configuration Menus

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

n Remove the thermostat from its base and

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

set the SW2 switch to MENU.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

o Reinstall the thermostat. The thermostat is

 

 

 

 

 

 

 

 

1A model

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

now in configuration mode. The first digit

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

flashes to indicate that the first item of the

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

menu can now be modified.

 

 

 

 

Application

 

Default mode &

 

 

NSB value

 

Output 1

 

 

 

Maximum

 

 

Minimum

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

p To modify the setting, use the up/down

 

 

 

Output 1 type

 

 

 

min. opening

 

 

 

setpoint

 

 

setpoint

 

 

(section 4.2)

 

 

 

 

(section 5.6)

 

 

 

 

 

 

 

 

 

 

(section 4.3.1)

 

 

 

 

 

(section 4.3.2)

 

(section 4.6)

 

(section 4.6)

 

 

 

arrows. Refer to the adjacent tables.

0

Internal sensor

0

 

Cool / 0-10V

1

 

1°C (2°F)

0

0%

 

 

 

 

 

 

 

 

 

 

 

 

1

Room

1

 

Heat / 0-10 V

2

 

2°C (4°F)

1

10%

 

Can be set

 

Can be set

 

q Press Override to save the new setting and

2

Return

2

 

Cool / 2-10 V

3

 

3°C (6°F)

2

20%

 

between 35°C

 

between 10°C

 

 

 

go to the next item.

 

 

 

3

Supply

3

 

Heat / 2-10 V

4

 

4°C (8°F)

3

30%

 

(95°F) and

 

(50°F) and

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

’’minimum

 

’’maximum

 

r Repeat steps 3 and 4 for remaining items.

4

Auto changeover

 

 

 

 

5

 

5°C (10°F)

4

40%

 

 

 

 

 

 

 

 

 

setpoint + 1’’

 

setpoint - 1’’

 

5

Limited cooling

 

 

 

 

6

 

6°C (12°F)

5

50%

 

 

 

 

 

 

 

 

 

 

s When the configuration is done, set the

 

 

 

 

 

 

7

 

7°C (14°F)

 

 

 

Default value

 

Default value

 

 

 

 

 

 

 

 

 

 

 

 

 

 

is 35°C (95°F)

 

is 10°C (50°F)

 

 

 

SW2 switch back to NORMAL.

 

 

 

 

 

 

8

 

8°C (16°F)

 

 

 

 

 

 

 

 

 

 

 

 

9

 

9°C (18°F)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

NOTE: Factory settings are

 

 

 

 

 

 

 

 

 

 

1F model

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

inside the shaded cells.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Application

 

 

Default mode

 

 

NSB value

 

Output 1

 

 

 

Output 1

 

 

 

Maximum

 

 

Minimum

 

 

 

 

 

 

 

 

 

 

 

 

 

min. opening

 

 

 

opening time

 

 

 

setpoint

 

 

setpoint

 

 

 

 

 

 

 

 

(section 4.2)

 

(section 4.3.1)

 

 

(section 5.6)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

(section 4.3.2)

 

 

(section 4.3.3)

 

 

(section 4.6)

 

(section 4.6)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

0

Internal sensor

0

 

Cool

1

 

1°C (2°F)

0

0%

 

0

 

80

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

1

Room

1

 

Heat

2

 

2°C (4°F)

1

10%

 

1

 

90

 

 

Can be set

 

Can be set

 

 

 

 

 

 

 

2

Return

 

 

 

 

3

 

3°C (6°F)

2

20%

 

2

 

100

 

 

between 35°C

between 10°C

 

 

 

 

 

 

 

3

Supply

 

 

 

 

4

 

4°C (8°F)

3

30%

 

3

 

110

 

 

(95°F) and

 

(50°F) and

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

’’minimum

 

’’maximum

 

 

 

 

 

 

 

4

Auto changeover

 

 

 

 

5

 

5°C (10°F)

4

40%

 

4

 

120

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

setpoint + 1’’

 

setpoint - 1’’

 

 

 

 

 

 

 

5

Limited cooling

 

 

 

 

6

 

6°C (12°F)

5

50%

 

5

 

130

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

7

 

7°C (14°F)

 

 

 

6

 

140

 

 

Default value

 

Default value

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

is 35°C (95°F)

is 10°C (50°F)

 

 

 

 

 

 

 

 

 

 

 

 

 

8

 

8°C (16°F)

 

 

 

7

 

150

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

9

 

9°C (18°F)

 

 

 

8

 

160

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

1A2T model

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Application

Default mode &

 

 

Output 2 typea

 

Output 3 type

 

 

 

Output 3

 

 

 

NSB value

 

 

 

 

Output 1

 

Maximum

 

Minimum

 

 

 

Output 1 type

 

 

 

 

 

activation

 

 

 

 

 

 

 

min. opening

 

setpoint

setpoint

 

(section 4.2)

 

 

 

(section 4.4)

 

(section 4.5)

 

 

 

 

 

 

(section 5.6)

 

 

 

 

 

 

(section 4.3.1)

 

 

 

 

 

 

(section 4.5)

 

 

 

 

 

(section 4.3.2)

 

(section 4.6)

(section 4.6)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

0

Internal sensor

0

 

Cool / 0-10V

0

 

Not used

 

0

Not used

 

0

100%

 

 

1

 

1°C (2°F)

 

0

 

0%

 

 

 

 

 

 

 

1

Room

1 Heat / 0-10 V

1

 

SSR 24 VAC

 

1

SSR 24 VAC

 

1

10%

 

 

2

 

2°C (4°F)

 

1

 

10%

 

 

Can be set

Can be set

2

Return

2

Cool / 2-10 V

 

2

 

N.C. Valve

2

N.C. Valve

2

20%

 

3

 

3°C (6°F)

 

 

2

20%

 

 

 

 

 

 

 

 

 

 

between 35°C

between 10°C

3

Supply

3 Heat / 2-10 V

3

 

N.O. Valve

3

N.O. Valve

3

30%

 

4

 

4°C (8°F)

 

3

30%

 

 

 

 

 

 

 

 

(95°F) and

(50°F) and

4

Auto changeover

 

 

 

 

4

 

Mech. relay

4

Mech. relay

4

40%

 

5

 

5°C (10°F)

 

4

40%

 

 

’’minimum

’’maximum

5

Limited cooling

 

 

 

 

5

 

SSR 3-32 V

5

Contact

5

50%

 

6

 

6°C (12°F)

 

5

50%

 

 

setpoint + 1’’

setpoint - 1’’

 

 

 

 

 

 

6

 

SCR 0-10 V

 

 

6

60%

 

7

 

7°C (14°F)

 

 

 

 

 

 

 

Default value

Default value

 

 

 

 

 

 

7

 

Act. 0-10 V

 

 

7

70%

 

8

 

8°C (16°F)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

is 35°C (95°F)

is 10°C (50°F)

 

 

 

 

 

 

8

 

Act. / 2-10 V

 

 

8

80%

 

9

 

9°C (18°F)

 

 

 

 

 

 

 

 

 

 

 

 

990%

a. If Output 2 type is set to 0-4, set the SW6 switch to Triac. If the output type is set to 5-8, set the switch to Analog (see section 4.7).

1F2T model

 

Application

 

Default mode

 

Output 2 typea

 

Output 3 type

 

 

Output 3

 

NSB value

 

 

Output 1

 

 

Output 1

Maximum

Minimum

 

 

 

 

 

 

activation

 

 

 

min. opening

 

opening time

setpoint

setpoint

 

(section 4.2)

(section 4.3.1)

 

 

(section 4.4)

 

 

(section 4.5)

 

 

 

(section 5.6)

 

 

 

 

 

 

 

 

 

(section 4.5)

 

 

(section 4.3.2)

(section 4.3.3)

(section 4.6)

(section 4.6)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

0

Internal sensor

0

 

Cool

0

 

Not used

0

 

Not used

0

 

100%

1

 

1°C (2°F)

0

 

0%

0

80

 

 

1

Room

1

 

Heat

1

 

SSR 24 VAC

1

 

SSR 24 VAC

1

 

10%

2

 

2°C (4°F)

1

 

10%

1

90

Can be set

Can be set

2

Return

 

 

 

2

 

N.C. Valve

2

 

N.C. Valve

2

20%

3

 

3°C (6°F)

2

20%

2

 

100

between

between

3

Supply

 

 

 

3

 

N.O. Valve

3

 

N.O. Valve

3

30%

4

 

4°C (8°F)

3

30%

3

 

110

35°C (95°F)

10°C (50°F)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

and ’’min

and ’’max

4

Auto changeover

 

 

 

4

 

Mech. relay

4

 

Mech. relay

4

40%

5

 

5°C (10°F)

4

40%

4

120

 

 

 

 

 

 

setpoint + 1’’

setpoint - 1’’

5

Limited cooling

 

 

 

5

 

SSR 3-32 V

5

 

Contact

5

50%

6

 

6°C (12°F)

5

50%

5

130

 

 

 

 

 

 

 

 

 

 

 

 

 

6

 

SCR 0-10 V

 

 

 

6

60%

7

 

7°C (14°F)

 

 

 

6

140

Default

Default

 

 

 

 

 

7

 

Act. 0-10 V

 

 

 

7

70%

8

 

8°C (16°F)

 

 

 

7

150

value is

value is

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

35°C (95°F)

10°C (50°F)

 

 

 

 

 

8

 

Act. / 2-10 V

 

 

 

8

80%

9

 

9°C (18°F)

 

 

 

8

160

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

990%

a. If Output 2 type is set to 0-4, set the SW6 switch to Triac. If the output type is set to 5-8, set the switch to Analog (see section 4.7).

TH150

400-150-000-C

5/9/06

3/6

Page 2 Page 4
Page 3
Image 3
Aube Technologies TH150 Series manual Configuration Menus
Page 2 Page 4

TH150 Series specifications

Aube Technologies TH150 Series is an innovative line of programmable thermostats designed to enhance temperature control in residential and commercial settings. The TH150 Series offers a blend of modern design, intuitive operation, and advanced technology, making it an ideal choice for users seeking efficiency and comfort.

One of the standout features of the TH150 Series is its user-friendly interface. Equipped with a large, easy-to-read LCD screen, the thermostat allows users to easily navigate through settings and programming options. The display provides clear information on both current and set temperatures, along with system status indicators, enhancing user experience and convenience.

The TH150 Series boasts a highly customizable programming system, enabling users to create heating or cooling schedules tailored to their unique lifestyle. With 7-day programming capabilities, users can set different temperatures for weekdays and weekends, ensuring optimal comfort and energy savings. The thermostat also supports temporary overrides, allowing users to make quick adjustments without disrupting their programming.

In terms of technology, the TH150 Series incorporates advanced algorithms for precise temperature control. This results in improved energy efficiency and reduced utility bills. The thermostat is compatible with a variety of heating and cooling systems, including electric baseboards, convectors, and heat pumps, making it a versatile choice for diverse applications.

Energy efficiency is further enhanced by the inclusion of a Smart Mode feature, which optimizes heating and cooling cycles based on user habits. This intelligent capability allows the thermostat to learn and adapt to the occupants’ preferences, providing a balance of comfort and cost-effectiveness.

The TH150 Series is also designed with durability in mind. Its sleek and modern design not only complements any decor but is also built using high-quality materials to ensure long-lasting performance. The thermostat operates quietly, contributing to a peaceful environment.

Additional features include battery backup for maintaining settings during power outages and a lockable keypad to prevent unauthorized adjustments. With Aube Technologies TH150 Series, users can experience innovative temperature control that meets their modern lifestyle demands while promoting energy efficiency and comfort.
Top Page Image Contents