Aube Technologies TH303 Configuration parameters cont’d, 1 Fan, Away temperature, Early Start

TH303

Configuration parameters (cont’d)

1Fan

Place at Yes if you have a fan-forced heater (to prevent premature burnout of the motor). Leave at No for better temperature regulation if you do not have a fan-forced heater.

2Away temperature

Set the temperature you wish to use when the thermostat is in Away mode (see page 10).

3Daylight Saving Time

When the Daylight Saving Time function is enabled (On), the thermostat automatically switches to Daylight Saving Time on the second Sunday of March and to normal time on the first Sunday of November.

4Early Start

Early Start is used in Automatic mode only. When Early Start is enabled (On), the thermostat determines when to start heating so the desired temperature is attained at the beginning of Wake and Return periods. When Early Start is disabled (Off), heating starts only at the beginning of Wake and Return periods; thus there is a delay before you reach the desired temperature.

15