Audio-Technica warranty AE5100 Cardioid Condenser Microphone

AE5100 CARDIOID CONDENSER MICROPHONE

•Uncompromising sound quality for overheads, percussion, acoustic guitar, strings and other acoustic instruments

•Large-diaphragm capsule delivers accurate and natural response

•Low-profile design permits innovative placement options previously unattainable with a large-diaphragm condenser

•Robust design for enduring dependability on the road

•Integral 80 Hz HPF switch and 10 dB pad

•Cardioid polar pattern reduces pickup of sounds from the sides and rear, improving isolation of desired sound source

The AE5100 is intended for use in professional applications where remote power is available. It requires 11V to 52V DC phantom power, which may be provided by a mixer or console, or by a separate, in-line source such as the Audio-Technica AT8801 single- channel or CP8506 four-channel phantom power supplies.

Output from the microphone’s XLRM-type connector is low impedance (Lo-Z) balanced. The signal appears across Pins 2 and 3; Pin 1 is ground (shield). Output phase is “Pin 2 hot” – positive acoustic pressure produces positive voltage at Pin 2.

To avoid phase cancellation and poor sound, all mic cables must be wired consistently: Pin 1-to-Pin 1, etc.

An integral 80 Hz hi-pass filter provides easy switching from a flat frequency response to a low-end roll-off. The roll-off position reduces the microphone’s sensitivity to popping in close vocal use. It also reduces the pickup of low-frequency ambient noise (such as traffic, air-handling systems, etc.), room reverberation and mechanically-coupled vibrations.

The AE5100 includes an AT8471 isolation clamp to provide secure mounting, versatile positioning, and effective dampening of unwant- ed mechanical noise.

Avoid leaving the microphone in the open sun or in areas where temperatures exceed 110° F (43° C) for extended periods. Extremely high humidity should also be avoided.

AE5100 SPECIFICATIONS†

ELEMENT	Fixed-charge back plate
	permanently polarized condenser
POLAR PATTERN	Cardioid
FREQUENCY RESPONSE	20-20,000 Hz
LOW FREQUENCY ROLL-OFF	80 Hz, 12 dB/octave
OPEN CIRCUIT SENSITIVITY	–36 dB (15.8 mV) re 1V at 1 Pa*
IMPEDANCE	150 ohms
MAXIMUM INPUT SOUND LEVEL	148 dB SPL, 1 kHz at 1% T.H.D.;
	158 dB SPL, with 10 dB
	pad (nominal)
NOISE1	11 dB SPL
DYNAMIC RANGE (typical)	137 dB, 1 kHz at Max SPL
SIGNAL-TO-NOISE RATIO1	83 dB, 1 kHz at 1 Pa*
PHANTOM POWER	11-52V DC, 3.2 mA typical
REQUIREMENTS
SWITCHES	High-pass filter;
	10 dB pad (nominal)
WEIGHT (less accessories)	5.0 oz (143 g)
DIMENSIONS	5.85" (148.5 mm) long, 1.02"
	(26.0 mm) maximum diameter
OUTPUT CONNECTOR	Integral 3-pin XLRM-type
ACCESSORIES FURNISHED	AT8471 isolation clamp for
	5/8"-27 threaded stands; 5/8"-27 to
	3/8"-16 threaded adapter;
	AT8136 windscreen; soft
	protective pouch

†In the interest of standards development, A.T.U.S. offers full details on its test methods to other industry professionals on request.

*1 Pascal = 10 dynes/cm 2 = 10 microbars = 94 dB SPL

1Typical, A-weighted, using Audio Precision System One. Specifications are subject to change without notice.

Polar Pattern

0

Frequency Response

330 30

300	60
											in dB
270	90									10 dB	Response
240	120
210	150	50	100	200	500	1k	2k	5k	10k	20k

	180	Frequency in Hertz
	SCALE IS 5 DECIBELS PER DIVISION
LEGEND	LEGEND	12" or more on axis
200 Hz		Roll-off

1kHz

5kHz

8kHz

One-Year Limited Warranty

Audio-Technica brand products purchased in the U.S.A. are warranted for one year from date of purchase by Audio-Technica U.S., Inc. (A.T.U.S.) to be free of defects in materials and workmanship. In event of such defect, product will be repaired promptly without charge or, at our option, replaced with a new product of equal or superior value if delivered to A.T.U.S. or an Authorized Service Center, prepaid, together with the sales slip or other proof of purchase date. Prior approval from A.T.U.S. is required for return. This warranty excludes defects due to normal wear, abuse, shipping damage, or failure to use product in accordance with instructions. This warranty is void in the event of unauthorized repair or modification, or removal or defacing of the product labeling.

For return approval and shipping information, contact the Service Department, Audio-Technica U.S., Inc., 1221 Commerce Drive, Stow, Ohio 44224.

Except to the extent precluded by applicable state law, A.T.U.S. will have no liability for any consequential, incidental, or special damages; any warranty of merchantability or fitness for particular purpose expires when this warranty expires.

This warranty gives you specific legal rights, and you may have other rights which vary from state to state.

Outside the U.S.A., please contact your local dealer for warranty details.

Audio-Technica U.S., Inc., 1221 Commerce Drive, Stow, Ohio 44224

Audio-Technica Limited, Old Lane, Leeds LS11 8AG England

www.audio-technica.com

P51491-EN ©2002 Audio-Technica U.S., Inc. Printed in Japan