Introduction

Please Note!

This manual assumes use of microphone-level inputs and line-level output, the most typical SmartMixer application. However, all inputs and the output may be individually switched internally to achieve any combination of mic- and line-level input/output. See page 10 for details.

What is a SmartMixer?

The AT-MX351 SmartMixer® is a microprocessor controlled, automatic switching, five-channel mixer.

The four microphone inputs are XLRF-type balanced, with 48-volt phantom power available on pins 2 and 3. The Aux input is an RCA jack accepting auxiliary-level input from sources such as tape decks and VCRs. There is no signal processing of the Aux input. The mixer output is XLRM-type balanced, non-inverting.

All AT-MX351 and AT-MX341a SmartMixers can be daisy-chained via the included AT8325/1.0 Link Cable and special connectors on the rear panel. The control bus and the audio are carried between mixers by the link cable. The result is that all microphones on a multi-mixer system can be controlled by one microphone connected to any mixer. Since all of the mixers are independently powered, there is no practical limit to the number of SmartMixers that can be daisy-chained.

Features

The AT-MX351 provides an independent gain control on the front panel for each input channel. Substantial gain reserve and adjustment range permit microphones of widely differing sensi- tivities to be used together successfully. Automatic threshold setting on all mic/line channels ensures proper gating levels for existing ambient sound conditions.

Priority Pre-select

To custom-tailor conferencing needs, the mode of each microphone channel can be indepen- dently switched via the front panel “Priority Pre-select” DIP switches. The combination of switch settings results in three different modes of priority selection/operation.

In any of the three modes of operation, when everyone stops talking, the last microphone “on” will remain “on.” In a teleconferencing, recording, or broadcast application, this feature will provide continuous room ambience. This feature is cascaded throughout all linked mixers so that only one microphone in the entire system will remain on.

When a microphone is “off,” its input is only attenuated. This attenuation is factory set at

8 dB. The amount of “off ” attenuation can be internally adjusted between 6 dB and 40 dB if desired. (See page 12, “Adjusting ‘Off ’ Attenuation.”)

If automatic switching is not desired, a “manual” DIP-switch setting on the front panel bypasses the AT-MX351’s automatic switching and attenuation functions, causing the unit to behave like a conventional mixer. In this mode, the relative level of each microphone is strictly a function of the position of its respective front-panel gain control.

NOMA (Number of Open Microphones Attenuated)

The NOMA system helps control feedback by allowing for the increase in system gain that occurs when the number of open microphones increases. A built-in matrix in the AT-MX351 recognizes exactly how many microphones are on and automatically adjusts the gain accord- ingly. Because use of NOMA is not always appropriate or desired, the AT-MX351 is shipped with the NOMA function switched off.

5

Page 3 Page 5
Page 4
Image 4
Audio-Technica AT-MX351 manual Introduction, What is a SmartMixer?, Features, Priority Pre-select
Page 3 Page 5

AT-MX351 specifications

The Audio-Technica AT-MX351 is a versatile mixer that has gained a strong reputation amongst audio professionals for its performance and utility. Designed for various applications, from live sound to permanent installation, the AT-MX351 boasts features that enhance audio quality and ease of use.

One of the standout features of the AT-MX351 is its ability to handle multiple audio sources with ease. It features three programmable microphone inputs, making it perfect for settings where multiple speakers or performers are involved. This is especially useful in conference rooms, lecture halls, and places of worship, where different users may need to take turns speaking without the hassle of connecting and disconnecting microphones.

The mixer is equipped with advanced automatic mixing technology, which intelligently manages the audio levels from various microphones. This prevents feedback and minimizes background noise, resulting in clear and intelligible sound. The AT-MX351 utilizes Audio-Technica's proprietary Automatic Gain Controls (AGC) to ensure that the audio levels remain consistent, providing a professional sound experience.

In terms of connectivity, the AT-MX351 features balanced XLR inputs, allowing for secure connections that maintain audio integrity. It also includes unbalanced line inputs, catering to a wider array of equipment. The mixer offers both balanced and unbalanced outputs, providing flexibility for integration into different sound systems.

Another notable characteristic of the AT-MX351 is its user-friendly interface. The layout of the controls is intuitive, allowing operators to make quick adjustments on the fly. The clear LED indicators help users monitor signal levels easily, making it easier to identify any issues. This is particularly beneficial during live events where quick decision-making is crucial.

The AT-MX351 also incorporates a built-in limiter and compressor, which help to avoid distortion and maintain a consistent sound quality. This feature is especially important in environments with varying acoustic dynamics or when dealing with powerful audio signals.

In summary, the Audio-Technica AT-MX351 mixer stands out due to its robust features, including multiple programmable microphone inputs, advanced automatic mixing technology, and user-friendly controls. This combination of technology and usability makes it an ideal choice for audio professionals seeking reliability and high-quality sound in their applications. Whether for live performances, conferences, or installations, the AT-MX351 proves to be a reliable and effective solution in the audio mixing landscape.
Top Page Image Contents