Audio-Technica AT 4060 manual Specifications

447

AT4060

microphone shall include a power supply, a shock mount, an AC power cable, rack-mount adapters for the power supply and a protective carrying case.

The Audio-Technica AT4060 is specified.

Specifications
Element	Externally polarized (DC bias) condenser
Polar pattern	Cardioid
Frequency response	20-20,000 Hz
Open circuit sensitivity	–34 dB (19.9 mV) re 1V at 1 Pa
Impedance	200 ohms
Maximum input sound level	150 dB SPL, 1 kHz at 1% T.H.D.;
	149 dB SPL, 1 kHz at 0.5% T.H.D.
Noise1	19 dB SPL
Dynamic range (typical)	131 dB, 1 kHz at Max SPL
Signal-to-noise ratio1	75 dB, 1 kHz at 1 Pa
Phantom power requirements	AT8560 power supply (120V AC)
Weight	Microphone: 640 g (22.6 oz)
	Power supply: 1.9 kg (4.19 lbs)
Dimensions	Microphone: 210.0 mm (8.27") long,
	53.4 mm (2.10") maximum body diameter
	Power supply: 210.0 mm (8.27") W x
	225.0 mm (8.86") D x 44.0 mm (1.73") H
Output connector	3-pin XLRM-type (on power supply)
Cables	10 m (32.8') cable with 6 pin XLR-type
	connectors for use between microphone
	and power supply; AC power supply
	cable
Accessories furnished	AT8560 power supply; AT8447 shock
	mount for 5/8"-27 threaded stands;
	rack-mount adapters for power supply;
	protective mic carrying case

In the interest of standards development, A.T.U.S. offers full details on its test methods to other industry professionals on request.

1 Pascal = 10 dynes/cm2 = 10 microbars = 94 dB SPL

1Typical, A-weighted, using Audio Precision System One. Specifications are subject to change without notice.

frequency response: 20– 20,000 Hz

	in dB
	Response
10 dB

50	100	200	500	1k	2k	5k	10k	20k
			Frequency in Hertz
LEGEND		12" or more on axis

polar pattern

330˚	0˚
	30˚
300˚	60˚
270˚	90˚
240˚	120˚
		LEGEND
210˚	150˚	200 Hz
		1 kHz
	180˚
		5 kHz
SCALE IS 5 DECIBELS PER DIVISION
		8 kHz

Audio-Technica U.S., Inc., 1221 Commerce Drive, Stow, Ohio 44224
Audio-Technica Limited, Old Lane, Leeds LS11 8AG England
©2010 Audio-Technica U.S., Inc. audio-technica.com	0001-0197-00