85
ATW-R1820
and shall incorporate standard
The receiver as supplied shall include a soft pouch with stainless steel clip for attaching it to a camera, sound mixer bag or the operator’s belt. The receiver shall have a metal case with removable battery door and be finished in
The
top
Specifications
Receiving system | Dual independent RF sections, automatic- |
| switching diversity |
Image rejection | >50 dB typical |
104 dB at 30 kHz deviation | |
| maximum modulation 37 kHz |
Total harmonic distortion | ≤1% (±10 kHz deviation at 1 kHz) |
Sensitivity | 25 dBµV, (S/N 60 dB at 5 kHz deviation, |
| |
Audio output | Balanced: 27 mV (at 1 kHz, ±5 kHz deviation) |
Output connector | |
Monitor headphone output (typical) | 35 mW max., 32 ohm load (per channel) |
Monitor headphone jack | 3.5 mm TRS, signals on both Tip and Ring |
External power requirements | 12V DC nominal, 500 mA |
Batteries | Six 1.5V AA alkaline (not included) |
Current consumption (battery) | |
| |
Battery life | 6 hours typical |
| typical |
| battery type and use pattern |
Dimensions | 85.0 mm (3.35") W x 133.0 mm (5.24") H x |
| 36.0 mm (1.42") D |
Net weight | 425 g (15.0 oz) (without batteries) |
Accessories included | Two flexible UHF antennas; two 18" TA3F- to |
|
|
|
|
In the interest of standards development, A.T.U.S. offers full details on its test methods to other industry professionals on request.
1 Pascal = 10 dynes/cm2 = 10 microbars = 94 dB SPL
Specifications are subject to change without notice.
bottom
| |
| |
©2010 |