System Operating Frequencies
Frequency Selection
Each transmitter/receiver system operates on a single factory aligned,
Operating frequency is specified by a two character code,
such as “T2,” in addition to the actual frequency in MHz. The fre- quency of each transmitter appears on a label on the outside of the unit. The frequency of each receiver appears on a label on the rear panel of the unit and the frequency of each system appears on the outer carton. For future reference, please record them in the space provided below.
RF Interference
Please note that wireless frequencies are shared with other radio services. According to Federal Communications Commission regulations, “Wireless microphone operations are unprotected from interference from other licensed operations within the band. If any interference is received by any Government or
If you need assistance with operation or frequency selection, please contact your dealer or the
Extensive wireless information also is available on the
Application | Freq. Code | Freq. (MHz) |
• Traveling frequencies: | T2 | 169.505 |
(Normally work anywhere in the U.S.A. and | T3 | 170.245 |
Canada.) | T8 | 171.905 |
Systems on these frequencies may be combined for up to three simultaneous operating channels.
For future reference, please record your system information here (the serial numbers appear near the screwdriver clip in each transmitter, and on the bottom of
each receiver):
Operating Frequency |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |||||
Freq. Code |
|
|
|
|
| Frequency |
|
|
|
|
|
|
|
| • |
|
|
|
|
|
| MHz | ||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| ||||||||||
Receiver |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |||||
Model | Serial Number |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| ||||||||
Transmitter |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |||||
Model |
|
| Serial Number |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| ||||||
1/2 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| ||||
6
