Audio-Technica Pro42 PRO 42 SPECIFICATIONS†, Polar Pattern, Dimensions, Optional Accessories

PRO42

	Polar Pattern
	0
330	30

PRO 42 SPECIFICATIONS†

Element	Fixed-charge back plate
	permanently polarized condenser
Polar Pattern	Half-cardioid (cardioid in hemisphere above
	mounting surface)

300	60		Frequency Response	70-14,000 Hz
			Open Circuit Sensitivity	–38 dB (12.5 mV) re 1V at 1 Pa*
			Impedance	100 ohms
270		90	Maximum Input Sound Level	134 dB SPL, 1 kHz at 1% T.H.D.
			Signal-to-noise Ratio1	65 dB, 1 kHz at 1 Pa*
			Dynamic Range (Typical)	105 dB, 1 kHz at Max SPL
240	120		Phantom Power Requirements	9-52V DC, 2 mA typical
			Weight (less cable)	1.2 oz (35 grams)
210	150		Dimensions	1.44" (36.6 mm) max width,

180

2.14" (54.3 mm) max length, 0.61" (15.5 mm) height

SCALE IS 5 DECIBELS PER DIVISION

LEGEND

200Hz

1kHz

5kHz

8kHz

Output Connector	3-pin XLRM-type
Cable	25' (7.6 m) long (permanently attached
	to microphone), 0.10" (2.6 mm) diameter,
	2-conductor, shielded cable
† In the interest of standards development, A.T.U.S. offers full details
	on its test methods to other industry professionals on request.
* 1 Pascal = 10 dynes/cm2 = 10 microbars = 94 dB SPL
1	Typical, A-weighted, using Audio Precision System One

2.14" 54.3 mm

1.44" 36.6 mm

Dimensions

25	2.68"
7.6 m		68.0 mm
0.10"	0.75"
2.6 mm		19.0 mm

Optional Accessories:

CP8201 line matching transformer (Lo-Z to 50,000 ohms).

AT8202 adjustable in-line attenuator for use with balanced Lo-Z microphones.

AT8314 2-conductor, shielded, vinyl-jacketed, broadcast-type cable with XLRF-type connector at microphone end, XLRM-type connector at equipment end. Available in 10', 20', 25', 30', 50' & 100' lengths.

CP8506 four-channel 48V phantom power supply (AC powered).

AT8801 single-channel 48V phantom power supply (AC powered).

One-Year Limited Warranty

Audio-Technica microphones and accessories purchased in the U.S.A. are warranted for one year from date of purchase by Audio-Technica U.S., Inc. (A.T.U.S.) to be free of defects in materials and workmanship. In event of such defect, product will be repaired promptly without charge or, at our option, replaced with a new product of equal or superior value if delivered to A.T.U.S. or an Authorized Service Center, prepaid, together with the sales slip or other proof of purchase date. Prior approval from A.T.U.S. is required for return. This warranty excludes defects due to normal wear, abuse, shipping damage, or failure to use product in accordance with instructions. This warranty is void in the event of unauthorized repair or modification.

For return approval and shipping information, contact the Service Depar tment, Audio-Technica U.S., Inc., 1221 Commerce Drive, Stow, Ohio 44224.

Except to the extent precluded by applicable state law,

A.T.U.S. will have no liability for any consequential, incidental, or special damages; any warranty of mer- chantability or fitness for particular purpose expires when this warranty expires.

This warranty gives you specific legal rights, and you may have other rights which vary from state to state.

Outside the U.S.A., please contact your local dealer for warranty details.

Audio-Technica U.S., Inc., 1221 Commerce Drive, Stow, Ohio 44224

Audio-Technica Limited, Old Lane, Leeds LS11 8AG England

Form No. 0320-0803-01-B/W © 1998 Audio-Technica U.S., Inc. Printed in U.S.A.