Manuals / Audio-Technica / Musical Instruments & Equipment / Microphone

Audio-Technica U853RU, U853RWU manual Features, Description, Installation and Operation

Models: U853RU U853RWU

1 2
Download 2 pages 5.6 Kb
Page 1
Image 1

U853RU & U853RWU

UniLine® Condenser Hanging Microphones

Features

•UniLine® polar pattern provides narrow 90º acceptance angle

•Low-profiledesign with low-reflectance finish for minimum visibility

•Superior off-axis rejection for maximum gain before feedback

•UniGuard® RFI-shielding technology offers outstanding rejection of radio frequency interference (RFI)

•UniSteep® filterprovides a steep low-frequency attenuation to minimize pickup of undesired ambient noise

•Available interchangeable elements permit angle of acceptance from 90º to 360º

•Steel hanger positions microphone over choirs, instrumental groups and theater stages

•Available in two colors: black (U853RU) and white (U853RWU)

Description

The U853RU is a wide-range miniature condenser microphone with a UniLine® (line cardioid) polar pattern. It is designed for quality sound reinforcement, professional recording, television and other demanding sound pickup applications. The combination of small size and excellent response makes the microphone ideal for suspension over choirs, instrumental groups or theater stages.

The microphone requires 11V to 52V phantom power for operation.

The microphone is equipped with UniGuard® RFI-shielding technology, which offers outstanding rejection of radio frequency interference (RFI).

The microphone's UniLine® (line cardioid) polar pattern provides a 90° angle of acceptance. Additional interchangeable elements with omnidirectional (360°), cardioid (120°) and hypercardioid (100°) pickup patterns are available.

unipoint® microphones

Installation and Operation

The U853RU requires 11V to 52V phantom power for operation.

A uniform 90° angle of acceptance provides well-balanced audio pickup. The microphone should be located forward of the front-most source, above the rear-most source, and “aimed” between them (Fig.1). Increasing the height of the mic above the sources will tend to equalize sound levels between them, but may also increase background/ reverberant sound pickup. When possible, the distance from the mic to the rear-most source should be no more than twice the distance to the front source, to maintain front-to-rear balance (Fig. 1).

Width of pickup is approximately 1.5 times the distance to the closest performer. If additional mics are needed for wide sources, they should be positioned apart laterally at least 1.5 times the distance to the front source, to avoid phase cancellation (Fig. 2).

To orient the microphone in the proper direction, twist the housing slightly in its wire holder. (Clockwise rotation moves the microphone to the right; counterclockwise rotation moves it to the left.)

Output is low impedance (Lo-Z) balanced. The signal appears across Pins 2 and 3; Pin 1 is ground (shield). Output phase is “Pin 2 hot”— positive acoustic pressure produces positive voltage at Pin 2.

The provided two-stage foam windscreen simply slips over the head of the microphone, effectively reducing noise from wind or ventilation air currents.

An integral 80 Hz high-pass UniSteep® filter provides easy switching from a flat frequency response to a low-end roll-off. The roll-off position reduces the pickup of low-frequency ambient noise (such as traffic, air- handling systems, etc.), room reverberation and mechanically coupled vibrations. To engage the UniSteep® filter, use the end tip of a paperclip or other small pointed instrument to slide the switch toward the “bent” line.

Avoid leaving the microphone in the open sun or in areas where temperatures exceed 110° F (43° C) for extended periods. Extremely high humidity should also be avoided.

Note: Audio-Technica has developed a special RFI-shielding mechanism, which is an integral part of the connectors in the UniPoint® line. If you remove or replace the connector, you may adversely affect the unit's RFI immunity. Audio-Technica offers a crimp tool (ATCT) and RFI shields that enable you to shorten the cable and correctly reinstall the connector while maintaining the highest level of RFI immunity.

The microphone Includes a 7.6 m (25') permanently attached miniature cable. Its free end connects to the provided AT8538 power module via a special TA3F-type connector designed to optimize RFI immunity. The output of the power module is a 3-pin XLRM-type connector.

A recessed switch in the power module permits choice of flat response or low-frequency roll-off (via integral 80 Hz high-pass UniSteep® filter) to help control undesired ambient noise.

The microphone comes equipped with a power module, a vinyl-coated steel hanger for positioning over a choir/orchestra/stage, a two-stage foam windscreen and a 5/8"-27 stand adapter. The microphone is enclosed in a rugged housing with a low-reflectance black finish. It is also available with white housing, cable, hanger and windscreen as the U853RWU.

LESS THAN 2

TIMES “X”

D

IS

 

T

 

A

 

N

 

CE

 

“

 

X

 

”

 

90°

ANGLE OF ACCEPTANCE

Figure 1

90°

90°

MIC A

MIC B

 

1.5 TIMES

 

DISTANCE “X”

Figure 2

Page 2
Page 1
Image 1
Audio-Technica U853RU, U853RWU manual Features, Description, Installation and Operation
Page 2

U853RU, U853RWU specifications

Audio-Technica is a name synonymous with high-quality audio equipment, and its U853RWU and U853RU models exemplify this commitment to excellence in sound reproduction. Designed primarily for professional applications, these condenser microphones are ideal for podiums, presentations, and theater performances, offering superior performance and versatility.

The Audio-Technica U853RWU is a boundary microphone that excels in capturing clear and natural sound. One of its standout features is the half-cardioid polar pattern, which effectively isolates sound sources while minimizing background noise. This feature is particularly beneficial in environments where multiple speakers are present, ensuring that the microphone captures only the desired audio.

Another significant aspect of the U853RWU is its innovative design, which incorporates a low-profile enclosure. This allows for discreet placement, making it an excellent choice for aesthetic-sensitive settings such as conference rooms and auditorium stages. Additionally, the U853RWU offers a wide frequency response range of 30 Hz to 20 kHz, providing exceptional detail and clarity across the audio spectrum.

Similarly, the U853RU model shares many features with the U853RWU but is tailored for different applications. It also boasts high sensitivity and low self-noise, making it suitable for capturing nuanced vocal performances and instrument sounds. Both microphones are equipped with a robust construction designed to endure the rigors of stage use, ensuring longevity.

Audio-Technica employs advanced technologies in the U853RWU and U853RU, including a high-quality internal acoustic windscreen that minimizes popping sounds from plosives, further enhancing audio clarity. The frequency response can be tailored using optional accessories, allowing users to customize the mic's performance to better suit specific needs.

In summary, the Audio-Technica U853RWU and U853RU are powerful tools for audio professionals seeking reliability and high-fidelity sound. With features like half-cardioid polar patterns, wide frequency response, and durable construction, these microphones are designed to meet the demands of both live performances and studio recordings. Whether used in corporate environments or artistic venues, these models are primed to deliver exceptional audio quality.