Power the 985DTO from an Audio Authority
Mount the 985DTO modules near the video displays and audio source. Use matched sets of
Connect the Bus Output jacks of the first 985DTO to the Bus Input jacks of the next 985DTO, and so on. The bus
is automatically terminated correctly in 75 ohms at all times. There is no optical bus output, the Digital Audio Bus is always coaxial.
Connect each video display to one set of 985DTO outputs using matched sets of video patch cords. You may connect the digital audio input of a sound system to either Digital Audio output jack on the 985DTO, or if TV sound is desired, connect the 985DTO left/right stereo outputs to the stereo inputs on each TV.
Power the 985DTO system from an Audio Authority 571- 001 wall pack plugged into a source of 120 volts AC; picture and sound output appears immediately. No adjustments are required. You may also use a
In Case of Difficulty
Call Audio Authority Technical Service at
Composite
Video Source
Figure 2. Connect the composite video inputs and outputs to the Y component video jack. Use only composite video or component video in a
SDTV
A
B
C
E
INPUT
985DTO | 985DTO |
E
BUSBUS
985DTO
A
C
E
OUTPUT
A. Digital Audio (Coaxial)
B. Digital Audio (Optical)
C. Analog Stereo Audio
E. Composite Video
2048 Mercer Road, Lexington, Kentucky |
|
Phone: | |
Customer | |
Website: http://www.audioauthority.com | 9/06 |