Audiolab manual Specifications, Audiolab 8000AP - Pre-Amplifier

Models: 8000AP

1 4
Download 4 pages 23.78 Kb
Page 4
Image 4
SPECIFICATIONS

Audiolab 8000AP – Pre-Amplifier

6.Post DAC Phase Linear active filters.

Phase linear active filters are utilised after the D-A conversion, using components chosen for their excellent sonic characteristics. This moves DAC noise outside the audible spectrum, lowering the noise floor significantly and optimises the analogue output prior to amplification.

7.CODEC (SPDIF receiver, Stereo A/D, 8 Channel DAC)

The 8000AP uses a high quality 8 channel CODEC which includes the following features and performance.

A/D converters: 24Bit / 48kHz

D/A converters: 24Bit / 192kHz

S/PDIF receiver

8 Channel SPDIF input multiplexer

Differential analogue architecture

-100 dB THD+N

8.Microprocessor

A powerful microprocessor ensures all the component parts of the 8000AP work together seamlessly.

9.DSP

The 8000AP uses a "Dual" DSP which integrates a multi-channel audio decoder and a 32-bit audio processor with an audio optimised software framework. This allows the 8000AP to decode all of the popular processing modes listed below.

SPECIFICATIONS

Digital Inputs

Frequency Response

10Hz - 20KHz (+0.2dB), 5Hz - 75KHz (+3dB)

Distortion (THD+N)

less than 0.002%

 

Dynamic Range

greater than 103dB

 

Input sensitivity

0dBu (775mV/), Max 3.5V (2)

Analogue Input

Frequency Response

10Hz - 20KHz (+0.2dB), 5Hz - 24KHz (+3dB)

Distortion (THD+N)

greater than 0.003%

 

 

Dynamic Range

less than 100dB @ 1kHz

 

Input sensitivity

0dBu (775mV), Max 3.5V (2)

5.1 Analogue Bypaass

Frequency Response

10Hz - 20KHz (+0.2dB), 5Hz - 100KHz (+3dB)

input

Distortion (THD+N)

less thean 0.001%

 

Dynamic Range

greater than 110dB

Analogue Outputs

Output level

0dBu (775mV), MAX 3.5V

Volume control

-90dB to +15dB in 1dB steps, Channel C19imbalance

 

<+0.1dB

 

 

 

HDMI

Max resolution 1080p, HDCP compatible, 'Type A'

Video Outputs

Connectors

 

 

OSD

1.5Vp-p, 75ohm, PAL or NTSC

Power Supply

Mains voltage :

230VAC +/- 10%

Power consumption :

15W , (< 7W in Standby)

 

 

Dimensions (WxHxD -

445 x 74 x 338

Finish

mm)

 

 

Colour

Black / Silver

4

Page 4
Image 4
Audiolab manual Specifications, Audiolab 8000AP - Pre-Amplifier