AMP210 / AMP310
OWNER’S MANUAL
AMP210 SPECIFICATIONS
Stereo (8 ohm): | 90W RMS per channel at 8 ohms, |
| 20Hz - 20kHz, <0.1% THD+N |
Stereo (4 ohm): | 125W per channel at 4 ohms, |
| |
Bridged Mono (8 ohm): | 250W RMS at 8 ohms, |
| 20Hz - 20kHz, <0.2% THD+N |
Frequency Response: | 10Hz - 50kHz, +0dB, |
Signal to Noise Ratio: | 100dB |
| power at 4 ohms |
Channel Separation: | 69dB @ 1kHz, referred to rated power |
| at 8 ohms |
Sensitivity: | Variable, 350mV to 2.8V for rated |
| power at 8 ohms |
AC Power Consumption: | 700W maximum |
Net Weight: | 24lbs / 10.9kgs |
Gross Weight: | 31.7lbs / 14.4kgs |
3.8”
(96.5mm)
13.75”
(349mm)
Speakers
AB
16.5” (419mm)
AMP210 |
|
|
|
|
Stereo Power Amplifier |
|
|
| |
Power | Balance Trim | Volume Trim | ||
Signal / Clip | Signal / Clip |
|
|
|
Left | Right |
|
|
|
| Left | Right | +6dB | |
16.5” (419mm)
AMP310 SPECIFICATIONS
Stereo (8 ohm): 150W RMS per channel at 8 ohms, 20Hz - 20kHz, <0.1% THD+N
Stereo (4 ohm): 225W per channel at 4 ohms,
Bridged Mono (8 ohm): 450W RMS at 8 ohms, 20Hz - 20kHz, <0.1% THD+N
5.5”
(140mm)
Speakers
A B
AMP310
Stereo Power Amplifier
| Power |
Signal / Clip | Signal / Clip |
Left | Right |
Balance Trim | Volume Trim | ||
Left | Right | +6dB | |
Frequency Response: 10Hz - 50kHz, +0dB,
Signal to Noise Ratio: 100dB
Channel Separation: 68dB @ 1kHz, referred to rated power at 8 ohms
Sensitivity: Variable, 350mV to 2.8V for rated power at 8 ohms
AC Power Consumption: 1200W maximum Net Weight: 33.1lbs / 15.0kgs
Gross Weight: 41.9lbs / 19.0kgs
AudioSource®
13970 SW 72nd Ave Portland, OR 97223 503.914.4688 www.audiosource.net
13.75”
(349mm)
AMP210 / AMP310 Owner’s Manual 8100.0359A
