AudioSource Amp Seven T owner manual Stereo Power Amplifier with Internal Bridging

Models: Amp Seven T

1 4
Download 4 pages 41.41 Kb
Page 1
Image 1
Owner’s Manual

Owner’s Manual

Amp Seven T

Stereo Power Amplifier with Internal Bridging

We hope that you will enjoy your AudioSource Amp Seven T. Please take a few moments to read this manual, and be sure to retain this document for future reference. Note: If any part of this product is damaged or missing, do not contact your AudioSource dealer. Please call us directly at 800-435-7115.

Using the Controls/Front Panel

Power Amp Seven T

This front panel button will manually switch the Amp Seven T on or off. A multicolored LED indicates its power status. To use the Auto On feature, leave this front panel switch in the on position.

Speaker Selector Stereo Power Amplifier with Internal Bridging

The Amp Seven T has two pairs of speaker outputs. Press button A to activate the A outputs. Press button B to activate the B outputs. Both A and B outputs may be used simultaneously, provided the combined impedance does not fall below 2 ohms. Before pressing either of the speaker selector buttons, be sure that the level controls are set at the minimum position.

Input Level Controls Using the Controls/Front Panel

These knobs adjust the incoming signal level and thereby act as volume controls. We recommend that you set these at

midpoint and use your signal source (receiver, CD player, preamplifier, etc.) to adjust the volume.

Page 1
Image 1
AudioSource Amp Seven T owner manual Stereo Power Amplifier with Internal Bridging, Using the Controls/Front Panel