EQ 200
OWNER’S MANUAL
EQ 200
Ten-Band Stereo Graphic Equalizer
FEATURES:
Ten Bands from 30 Hz to 16 kHz
Tape 1 / Tape 2
Main Output
EQ Bypass
Front panel Right and Left Level controls
SPECIFICATIONS
Frequency Response: | 10 Hz - 50 kHz +/- 1 dB |
Harmonic Distortion: | 0.03% of nominal output |
Signal to Noise Ratio: | |
Input Impedance: | 100k ohms |
Output Impedance: | 600 ohms |
Load Impedance: | 10k ohms or more |
Inputs: | Audio, Video, |
| Tape 1, Tape 2 |
Outputs: | Main, Tape 1, Tape 2 |
Control Center Points: | 30 Hz, 60 Hz, 120 Hz, |
| 250 Hz, 500 Hz, 1 kHz, |
| 2 kHz, 4 kHz, 8 kHz, 16 kHz |
Control Range: | +/- 12 dB |
Dimensions: | |
(W x H x D) | (419 x 89 x 286 mm) |
Net Weight: | 8 lbs. (3.63 kg) |
Power Consumption: | 14 Watts |
AudioSource®
13970 SW 72nd Ave Portland, OR 97223 503.914.4688 www.audiosource.net
Congratulations on your purchase of the AudioSource® EQ 200. Please take a few moments to read this entire manual, and be sure to retain this document for future reference. Please read and observe all safety instructions detailed on page 2.
NOTE: If any part of this product is damaged or missing, please call your dealer or AudioSource® directly at 1.877.715.5439 or 503.914.4688.
Please read your warranty and retain your receipt and original carton for possible future use.
For more information about AudioSource® electronics, speakers and accessories please visit www.audiosource.net
The chart below will help you identify which sliders on the GRAPHIC EQUALIZER Section will most affect the sound and balance of particular instruments by illustrating where they lie in the overall sonic spectrum.
30 | 60 | 120 | 250 | 500 | 1,000 2,000 4,000 8,000 16,000 |
KICK DRUM
SNARE DRUM
CYMBALS
CHIMES
BASS GUITAR
LEAD GUITAR
FEMALE VOCAL
MALE VOCAL
SAXAPHONE
ORGAN
PIANO
STRING BASS
VIOLIN
CELLO
CLARINET
FLUTE
TRUMPET
Fundamental Note Harmonic or Overtone
EQ 200 Owner’s Manual