Speaker Mounting
If your application requires the LS 300 speakers to be mounted, please follow these directions.
Using the hardware supplied, mount the brackets first. To prevent scratching of the speakers, apply the enclosed
Please note that if the LS 300 speakers are to be placed on a bookshelf, speaker stand or equivalent, we have also provided
Hooking It Up
The
When connecting the speakers, it is very important to observe the correct polarity. This means that the wire attached to the +, red, or positive terminal on one component must be attached to the +, red, or positive terminal on the corresponding component's speaker output terminals. Similarly, the
Warranty
AudioSource speakers have a
LS 300 Specifications
. . . . . . . . . . . . . . . . . .Frequency Response: | 80 Hz - 20kHz | . . . . . . . . . . . . . . . . . . . . . .Woofer: . . . | . 4" Polypropylene |
Power Capacity: | . . . . 100 watts | Tweeter: | 3/4" Polycarbonate |
Impedance: | . . . . . . 8 ohms | Dimensions: | . . . . 8.5" x 6" x 6" |
Sensitivity: | . . . . . . . 89 dB | Weight: | . . . . . . . . . . 3 lbs. |
|
|
|
|
This manual provides detailed instructions for setting up your equipment.
We also offer friendly, toll-free assistance.
1.800.HELP.115
9300 North Decatur |
|
Portland, OR 97203 |
|
Tel. 503.286.9300 |
|
Fax 503.978.3302 |
|
audiosource@Phoenixgold.com |
|
www.audiosource.net | © 1999 AudioSource, Inc. |