AudioSource Speaker Mounting, Hooking It Up, Warranty, LS 400 Specifications, HELP.115

Speaker Mounting

If your application requires the LS 400 speakers to be mounted, please follow these directions.

Using the hardware supplied, mount the bracket first. To prevent scratching of the speakers, apply the self-adhe- sive pads provided to the inside of the bracket. Finally, attach the speakers to the brackets using the large plastic knobs supplied. Never mount a speaker on a wall made of unreinforced drywall or plasterboard. If you are unsure, con- sult a professional contractor.

Please note that if the LS 400 speakers are to be placed on a bookshelf, speaker stand or equivalent, we have also provided self-adhesive foot pads to protect and immobilize them on most surfaces. Note: If any part of this product is damaged or missing, do not contact your AudioSource dealer. Please call us directly at 800-435-7115.

Hooking It Up

The five-way binding posts on the LS 400 speakers will accommodate nearly any type of connector. For bare wire, press the binding post in to reveal the eye. Thread the wire into the eye, and release the spring-loaded connector. For banana plugs, simply insert the banana plug into the end of the connector. The binding post speaker terminals on the LS 400 speakers will accommodate up to 14-gauge wire.

When connecting the speakers, it is very important to observe the correct polarity. This means that the wire attached to the +, red, or positive terminal on one component must be attached to the +, red, or positive terminal on the corresponding component's speaker output terminals. Similarly, the –, black, negative, or ground terminals must connect to the respective –, black, negative, or ground terminals. This is easy to do by locating the color, stripe, or ribbing that appears on most wire.

Warranty

AudioSource speakers have a two-year, transferable warranty. Please read the enclosed warranty card. It is valuable to you as well as any subsequent owner during the term of the warranty.

LS 400 Specifications

. . . . . . . . . . . . . . . . . .Frequency Response:	80 Hz - 20kHz	. . . . . . . . . . . . . . . . . . . . . .Woofer: . . .	. 4" Polypropylene
Power Capacity:	. . . . 100 watts	Tweeter:	3/4" Polycarbonate
Impedance:	. . . . . . 8 ohms	Dimensions:	. . . . 8.5" x 6" x 6"
Sensitivity:	. . . . . . . 89 dB	Weight:	. . . . . . . . . . 3 lbs.

This manual provides detailed instructions for setting up your equipment.

We also offer friendly, toll-free assistance.

1.800.HELP.115

9300 North Decatur
Portland, OR 97203
Tel. 503.286.9300
Fax 503.978.3302
audiosource@Phoenixgold.com
www.audiosource.net	© 1999 AudioSource, Inc.