SPEAKER MOUNTING
If your application requires the LS 525 or LS 545 speakers to be mounted, please follow these directions.
Using the hardware supplied, mount the bracket first. To prevent scratching of the speakers, apply the self adhesive pads provided to the inside of the bracket. Finally, attach the speakers to the brackets using the large plastic knobs supplied. Never mount a speaker on a wall made of unreinforced drywall or plasterboard. If you are unsure, consult a professional contractor.
Please note that if the LS 525 or LS 545 speakers are to be placed on a bookshelf, speaker stand or equivalent, we have also provided
HOOKING IT UP
The
When connecting the speakers, it is very important to observe the correct polarity. This means that the wire attached to the (+), red, or positive terminal on one component must be attached to the (+), red, or positive terminal on the corresponding component’s speaker output terminals. Similarly, the,
WARRANTY
AudioSource speakers have a
LS 525/LS 545 SPECIFICATIONS
. . . . . . . . . . . . . . . . . . . . . . . . .Frequency Response: | 60 Hz - 20 KHz | . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Woofers: . . | 51⁄4" polypropylene |
Power Capacity: | . . . . . 125 watts | Tweeter: | . 3⁄4" polycarbonate |
Impedance: | . . . . . . . 8 ohms | Dimensi:ons | . . . 93⁄4" x 71⁄8" x 7" |
Sensitivity: | . . . . . . . . 89 db | Weight: | . . . . . . . . . . . 5 lbs |
|
|
|
|
This manual provides detailed instructions for setting up your equipment.
We also offer friendly,
1.800.HELP.115
A Phoenix Gold International Company |
|
9300 North Decatur |
|
Portland, OR 97203 |
|
Tel. 503.286.9300 |
|
Fax 503.978.3302 |
|
audiosource@phoenixgold.com |
|
www.audiosource.net | © 2001 Pheonix Gold Intl. |