AA-9103N
INSTALLATION GUIDE FOR:
Battery Back-Up
Printed in U. S. A. | Form No. |
SIREN MOUNTING:
1.Find a suitable spot to mount the siren in the engine compartment (firewall, sidewall, etc.).
2.Using siren bracket as a template, drill (2) 1/8" diameter holes in mounting surface.
Note: If mounting on the firewall, make certain there is no interference on the other side of the firewall.
3.Secure bracket using screws provided with kit.
4.Secure siren to the bracket using bolts and lock washers provided.
WARNING - Open end of siren must point downward to prevent water collection in horn end of siren.
WIRING:
RED WIRE - Splice to +12 VDC battery source lead of existing alarm.
BLACK WIRE - Splice to chassis ground lead of existing alarm.
WHITE w/ BLACK STRIPE WIRE - Connect to the positive siren output from the alarm module.
l
OFF | ||
ON | ||
| ||
NOTE: BEFORE MAKING |
| |
CONNECTION, MAKE |
| |
SURE KEY IS IN THE "OFF" |
| |
POSITION AS SHOWN. |
|
WHITE w/BLACK STRIPE - CONNECT TO
THE POSITIVE SIREN OUTPUT FROM THE
ALARM MODULE.
RED WIRE - SPLICE TO +12VDC BATTERY
SOURCE LEAD TO EXISTING ALARM.
l
NOTE : MAKE SPLICE CONNECTIONS AS CLOSE TO EXISTING ALARM AS POSSIBLE.
