Audiovox ACC40 installation manual Procedure for Vertical Installation

PROCEDURE FOR VERTICAL INSTALLATION

Note

If the anti-vibration spring position has been changed and verified for vertical mounting (as shown on page 3), start with step 2.

1

3

Set the anti-vibration springs to position "V".	2	Attach a mounting bracket to each side of the unit, using the
		hex head bolts with washer base.

position "V"

V	45°	Bracket
		H

Bracket

Hex head bolt with washer base

Determine the mounting location, and drill four mounting		4	Mount the unit in place, using four large self-tapping Phillips
holes.			head screws.
			Use RTV (silicone sealer) on screw threads or around
			the holes to prevent moisture intrusion.
NOTE: If mounting surface is carpeted, use caution
	when drilling holes to prevent drill bit from
	catching on carpet. Cut holes in carpet
	before drilling into sub-surface.		Self-tapping
			Phillips head screw
	Never mount the unit near the fuel tank.
			(large)

Bracket

Drill holes 1/8" (4mm) in diameter

Bracket

4