Audiovox ACD-21 Operating Instructions, Pwr Button, Volume +/- Level Control, Bass Control

Models: ACD-21

1 16
Download 16 pages 33.26 Kb
Page 6
Image 6
OPERATING INSTRUCTIONS

OPERATING INSTRUCTIONS

5

1PWR BUTTON

Press this button to turn the unit on and off. When the ignition switch is on and the radio is off, inserting a disc in the player will au- tomatically turn on the radio, and the disc will begin playing. When the radio is turned on, the volume level will start at the level at which it was set when the unit was turned off.

2VOLUME +/- LEVEL CONTROL

The volume level (VOL) is always displayed: it is symbolized by a bar graph across the top of the display from left to right, up to a maximum of 10. (Minimum bar display for VOLume is 1.) To increase the volume level, press the + side of the button. The volume will increase and the level will be shown on the display panel from a minimum of 1 bar to a maximum of 10 bars. To increase the volume quickly, keep the button pressed. To decrease the volume level, press the - side of the button. Keep the button pressed to decrease the volume quickly. The display will automatically return to the nor- mal VOL indication 5 seconds after the last volume adjustment or when another function is activated. These controls are also used

3to adjust the bass, treble, balance and fader levels as described in 4, 5, 6and 7.in conjunction with the AUDIO SELECT button

3AUDIO SELECT BUTTON (AUDIO SEL)

This button is used to select the audio function (bass, treble, balance, fade or volume) to be adjusted using the Volume +/- Level Control 2. Pressing the AUDIO SEL button once will set the unit for bass adjustment (BAS will ap- pear on the display panel), treble adjustment (TRE), balance (BAL), fader (FAD) and volume (VOL). The display will return to the normal VOL indication 5 seconds after the last adjustment or when another function is activated. All of these functions are symbolized in bar graph form, in a manner similar to volume.

4BASS CONTROL

To adjust the bass level, first select the Bass mode by pressing the AUDIO SEL button 3until the BAS indication appears on the display panel. Within 5 seconds of choosing the Bass mode, press the + or - buttons of the Volume +/- Level Control 2 to adjust the bass response as

Page 6
Image 6
Audiovox ACD-21 Operating Instructions, Pwr Button, Volume +/- Level Control, Audio Select Button Audio Sel, Bass Control