Audiovox AMP-592C High Performance Stereo Amplifier, Specifications, 128-5721SHT. 3 OF, Help

HIGH PERFORMANCE STEREO AMPLIFIER

This power amplifier has been designed to provide high quality performance with a minimum of maintenance. However, it's performance will only be as good as the care and quality of components with which it is installed. We therefore advise that you read these instructions very carefully to familiarize yourself with the product and it's features.

Should you require assistance with the installation or wiring of this unit, please call our toll-free "HELP" line at 1-800-645-4994 during the days/hours shown.

HELP!

1-800-645-4994

Monday - Friday	8:30am - 7:00pm Eastern
Saturday	9:00am - 5:00pm Eastern

SPECIFICATIONS

Maximum Output Power:	100 watts x 2 @ 4 ohms
Output Power @ 0.1% T.H.D.: 60 watts RMS x 2
Output Impedance:	2 - 8 ohms
Frequency Response:	10 - 50,000 Hz. ± 1 dB
Channel Separation:	50	dB
Signal / Noise Ratio:	90	dB (A-Weighted)
Input Impedance:	low-level 10K ohms
	high-level 100 ohms

Input Sensitivity:	low-level 200 mv. - 2 v.
	high-level 2 - 10 v.
Filter Type:	low-pass
Filter Slope:	12 dB/octave
Filter Crossover:	50 - 250 Hz. (selectable)
Supply Voltage:	12 volts, negative ground
Fuse Rating:	10 amps.
Dimensions (W x H x D): 12-1/4" x		2"	x 6-1/8"
	311 mm x	50 mm	x 155 mm

*Due to continuing improvement, Audiovox reserves the right to change features and design without notice.

-1-

128-5721 SHT. 3 OF 12