3
128-7767 3 of 19
To exit program mode, turn ignition off, or press and release valet switch.
RF Programmable Features Bank 3 Is Remote Start Selectable Features:
Feature Selection | 1 Chirp | 2 Chirps | 3 Chirps | 4 Chirps | 5 Chirps | 6 Chirps |
1st Defrost Output | Not Available |
|
|
|
|
|
2nd RF Start Chirp | Not Available |
|
|
|
|
|
3rd Run Time | 5 Mins | 10 Mins | 15 Mins | 20 Mins |
|
|
4th Parking Lights | On Steady | Flashing |
|
|
|
|
5th Input Check | Voltage | Tach | DBI Input |
|
|
|
6th Voltage Level | >0.5V B4 Start | < 0.5V B4 Start |
|
|
|
|
7th Ign. 2 Select | Off During Crank | On During Crank Same As Accy. |
|
|
| |
8th Ign. 3 Select | Not Available |
|
|
|
|
|
9th Diagnostics | Off | On |
|
|
|
|
10th Crank Time | 0.8 Sec | 1.0 Sec | 1.5 Sec | 2.0 Sec |
|
|
11th Gas/Diesel | Gas | Diesel 10 | Diesel 15 | Diesel 20 |
|
|
12th Transponder O/P | While R/S On | During Start | Until Ign. Off |
|
|
|
13th Temp Start | Not Available |
|
|
|
|
|
14th Crank Averaging | Averaging | Preset Time | Note: When averaging, the engine must be started 4 times with the key to be effective. | |||
15th R/S Shock | Not Available |
|
|
|
|
|
16th Turbo Select | Not Available |
|
|
|
|
|
17th Black/Blue (Aux O/P) | Single Pulse | As Feature #1Bank 2 |
|
|
| |
Note: When setting feature #17 to operate as feature #1 Bank 1 the transmitter will also control this output only while running under R/S command. So in other words, if this output is used to unlock the doors with the transmitter, the doors will unlock on startup. To
When using the RF programmer, enter the program mode as follows:
Turn the ignition on
Press and release valet switch 3 times turn ignition off then on
Press and hold valet switch for 5 seconds
Siren chirps 2 times indicating access to RF feature program mode.
To exit program mode, turn ignition off, or press and release valet switch.
