Audiovox AVD400T manual Video Display, TV Shape Display

F. Connections

White Audio In

Red Audio In

Yellow Video In

12DC	Remote control
IN/OUT
	receiver

	S-video out	TV ANTENNA
	Digital Out
		Yellow Video out
		Red Audio out
(GND)Black	(ACC+)Red	White Audio out

Figure 3

1. Powering your DVD Player ( Refer to Figure 3)

Connect the black wire (-) to the vehicle ground. Connect the red wire (+) to a switched (Accessory) 12VDC source. Plug the other end into the 12VDC input jack on the back of the unit.

2. Remote IR Receiver ( Refer to Figure 3)

Plug the 1/8 plug on the remote IR cable into the IR IN jack on the back of the DVD player. Place the IR receiver anywhere in the vehicle to allow remote control from any location.

3.Connecting to a Monitor

a. Match the color - coded plugs to the A/V OUTPUT jacks on the back of the DVD Player A/V OUTPUT jacks: Yellow (video) to Yellow, White (left audio) to White, and Red (right audio) to Red.

4.Connecting an External Video Source

To connect a video game or another audio/video source, plug the A/V cable into either the A/V input jacks on the front or rear of the DVD player.

6

2) Select Video by using the LEFT/RIGHT buttons, press ENTER

to enter the Video set up page.

Language	Video	Audio	Rating
TV Shape
		Wide	Normal/PS
TV System		NTSC	Normal/LB
			Wide

Video Display

a. Select TV Shape using the UP / DOWN buttons, then press

ENTER to enter the submenu. Select the TV shape you desire using the UP/DOWN buttons, then press ENTER to confirm the setting.

Language	Video	Audio	Rating
TV Shape
		Wide	Normal/PS
TV System		NTSC	Normal/LB
			Wide

TV Shape Display

*Normal/PS: When the player is connected to a normal TV, and a wide picture is shown on the full screen.

*Normal/LB: When the player is connected to a normal TV, and a wide picture is shown on the screen with a black strip at both the top and bottom of the screen.

*Wide: When the player is connected to a wide screen TV, a wide picture is shown on the full screen.

15