BEFORE CALLING SERVICE PERSONNEL
Before calling service personnel, check the following points for a possible cause of the trouble. A minor adjustment
on your part may eliminate the trouble.
SYMPTOMS CAUSE POSSIBLE SOLUTIONS
There is no power to the VCP. ♦ The power cord is not
connected.
♦ The polarity of power cord is not
correct.
♦ Check the power cord.
♦ Change the polarity of power cord.
No picture on screen when
playing back a recorded tape. ♦ The TV is not set to the video
channel, 3 or 4. ♦ Set your TV to the video channel, 3
or 4.
Noise bars on screen. ♦ Tracking is not adjusted. ♦ Adjust the picture to be clear by
pressing the PLAY key.
Operation key does not work ♦ If the cassette or the VCP is not
in normal condition, every
indicator LED/LAMP lights up
and the VCP does not work.
♦ Turn off the power and on by
pressing the POWER cord.
♦ Unplug and replug the power cord.
Cassette is ejected upon
insertion. ♦ Safety device works to protect
the cassette when it is inserted
incorrectly.
♦ Pull the cassette out (unloading it)
and insert it firmly into the cassette
compartment again.
Audio output does not change to
Hi-Fi mode. ♦ The cassette is recorded in
mono VCR.
♦ The first auto tracking is
executing now.
♦ The cassette can not be played
back in Hi-Fi mode.
♦ Wait for a second.
22