Connecting an Antenna or cable to Your TV
Your TV will provide you with the best performance if you connect it to an external
antenna or cable system. Follow the directions below to make this connection. Please note
that you will normally only have to make one of the connections shown below, not all of
them. All connections will be made to the antenna terminal on the back of your TV. The
antenna terminal is a silver metal post partially surrounded by two plastic tabs. For help in
locating the antenna terminal, see “Your TV’s Back Panel” on page 4.
Connecting an Antenna
If your antenna ends in a pair of 300Ω twin leads, you must use a 300Ω/75Ω adapter
(available at your local electronics store). Place the leads underneath the screws on the
adapter, tighten the screws, then press the adapter onto the antenna terminal on the back of
the TV.
Chapter 2: Connecting an Antenna or Cable to your TV-7
2
If your antenna ends in a single coaxial lead, simply
press or screw the cable onto the antenna terminal on
the back of your TV