Switch manual override as indicated on the last page of this manual, to by-pass the alarm system.

1.Open the vehicle door. The alarm will sound.

2.Turn the ignition key to the on position.

3.Within 5 seconds, press and release the valet push button switch.

The alarm system will stop sounding and enter the disarmed mode. You can now start and operate the vehicle normally.

Typically this override mode is used only if the transmitter has become inoperative. You may elect to enter the VALET mode until repair or replacement of the transmitter, after which, returning the system to the full operation mode is necessary. To do so, see item 3 under the heading VALET SWITCH.

PROGRAMMING YOUR CUSTOM CODE OVERRIDE:

Unlike override switches easily found, and defeated, this security system allows the consumer to program a personal override code, offering a higher level of security. To take advantage of this option, programmable feature # 10 must be selected for the Custom Code Option. Consult your installation center for programming details. The system comes from the factory with a pre-programmed override code of 11. To change this default override code, do the following:

1.Disarm the system by use of the transmitter, or by use of the emergency override sequence. Turn the ignition switch to the on position.

2.Within 10 seconds, press and release the valet/override switch, 3 times.

3.Within 10 seconds turn the ignition switch off, on, off, on, off, on. (The siren or horn will beep and the lights will flash one time.)

4.Within 10 seconds, begin to enter your chosen 10ths digit by pressing and releasing the pushbutton switch from 1 up to 9 times.

5.Within 10 seconds of the last entered 10ths digit, turn the ignition switch off then on.

6.Within 10 seconds, begin to enter your chosen units digit by pressing and releasing the pushbutton switch from 1 up to 9 times.

7.Finish by turning the ignition switch to the off position.

If the new code was accepted, the unit will report back the newly entered code, by flashing the LED, first indicating the 10ths digit, pause and then the units digit. The unit will report the new code three times with a one second pause between each code, then the system will begin arming. If the LED flash pattern reports the previously stored code, the new code was not entered correctly. Please repeat steps 1 through 7 above considering the following.

NOTE: Acceptable digits 10ths or units are 1 through 9. The unit will not recognize a 0 (Zero), or no digit entered in any place, units or tenths.

NOTE: If 15 seconds of inactivity expire, or if the ignition switch is turned off for more then 5 seconds during any of the above steps, the unit will revert back to the last successfully stored code.

Custom Code Programming Example:

To Change the code from the factory pre-assigned code of 11 to “52” you would do the following:

1.Disarm the system by use of the transmitter, or by use of the emergency override sequence.

Page 9

128-7406

9 of 16

Page 8 Page 10
Page 9
Image 9
Audiovox AVT597 owner manual Programming Your Custom Code Override
Page 8 Page 10

AVT597 specifications

The Audiovox AVT597 is a versatile and cutting-edge portable entertainment solution designed for modern consumers who demand high-quality audio and video playback on the go. This multimedia device combines functionality and stylistic design, making it an ideal choice for family trips, long flights, or everyday relaxation.

One of the standout features of the AVT597 is its large, high-resolution display. The 7-inch screen ensures that viewers can enjoy crisp and clear visuals, whether they're watching their favorite movies or playing video games. The screen features a swivel design, allowing users to adjust the viewing angle for optimal comfort. This flexibility enhances the overall experience, making communal viewing more enjoyable.

The AVT597 supports multiple media formats, making it compatible with a wide range of content. Users can enjoy DVDs, CDs, and even digital files via USB and SD card inputs. This multi-format support ensures that you can take your entire media library with you without being limited to one type of content. Furthermore, the device boasts an integrated rechargeable battery, providing hours of uninterrupted playback, ideal for long journeys or entertainment away from power sources.

In terms of sound, the AVT597 incorporates advanced audio technologies for a richer listening experience. It comes equipped with built-in stereo speakers that deliver clear and powerful sound. Additionally, it features a headphone jack, allowing users to connect their favorite headphones for a more personal listening experience.

The device enhances usability through its user-friendly interface, featuring easy navigation controls and an intuitive remote control. This ensures that users can seamlessly switch between different media types and access their favorite content with minimal effort.

Connectivity is another critical characteristic of the Audiovox AVT597. It is equipped with AV output options that facilitate easy connection to larger displays, such as TVs or projectors, making it an excellent choice for presentations or movie nights at home.

In conclusion, the Audiovox AVT597 stands out as a highly functional portable entertainment device. With its large display, wide media compatibility, advanced audio technologies, and user-friendly design, it caters to the diverse needs of entertainment enthusiasts. Whether at home or on the move, the AVT597 promises an exceptional multimedia experience for users of all ages.
Top Page Image Contents