WIRING INSTRUCTIONS

The wiring of your amplifier will depend on the system and speakers you are using but will either be a 4-Channel, 3-channel, 2-channel, or mixed-mono application. The following pages illustrate the input and output wiring for these types. Please refer to the appropriate diagrams for the system configuration you are using.

The power and speaker wire connections for this amplifier are made via screw tightened terminal blocks. Loosen the screw for the connection to be made and fully insert the wire (strip 1/2" of insulation from the end) under the respective screw on the side panel (crimp-on "U" terminals are provided to simplify wiring and we recommend their use.). Tighten the screw down to secure the wire.

1. Power Connection

The battery terminal (BATT) must be connected directly to the positive terminal of the vehicle battery to provide an adequate voltage source and minimize noise. Connecting the battery terminal lead to any other point (such as the fuse block) will reduce the power output and may cause noise and distortion. Use only #16 gauge or thicker (smaller gauge #) wire for this lead and connect it to the terminal of the battery after all other wiring is completed.

2. Ground Connection

The ground terminal (GND) connection is also critical to the correct operation of the amplifier. Use a wire of the same gauge as the power connection (#16 or thicker) and connect it between the ground terminal (GND) of the amplifier and a metal part of the vehicle close to the mounting location. This wire should be as short as possible and any paint or rust at the grounding point should be scraped away to provide a clean metal surface to which the end of the ground wire can be screwed or bolted.

3. Remote Turn-On Connection

The amplifier is turned on by applying +12 volts to the remote turn-on terminal (REM). The wire lead to this terminal should be connected to the "Auto-Antenna" lead from the car stereo which will provide the +12 volts only when the car stereo is turned on. If the car stereo does not provide an Auto-Antenna lead, the remote turn-on lead may be wired to an "Accessory" or "Radio" terminal in the car's fuse block. This will turn the amplifier on and off with the ignition key, regardless of whether the car stereo is on or off. The remote turn-on lead does not carry large currents, so #20 gauge wire may be used for this application.

-4-

Page 5 Page 7
Page 6
Image 6
Audiovox AXT-240 owner manual Wiring Instructions, Power Connection, Ground Connection, Remote Turn-On Connection
Page 5 Page 7

AXT-240 specifications

The Audiovox AXT-240 is a notable offering in the realm of portable audio and communication devices, designed to enhance user experience through advanced technology and ergonomic features. This device boasts a blend of functionality and stylish design, making it versatile for both casual and professional use.

One of the standout features of the AXT-240 is its robust audio performance, enabled by high-quality speakers that deliver clear sound across a wide range of frequencies. This ensures that users can enjoy their favorite music, podcasts, or audio content with exceptional clarity and depth. Additionally, the AXT-240 incorporates advanced noise-cancellation technology, which significantly reduces background noise, allowing for a more immersive listening experience, whether on a bustling street or in a crowded office.

The device is also equipped with Bluetooth connectivity, making it easy to pair with various devices such as smartphones, tablets, and computers. This wireless feature allows users to stream their audio content seamlessly without the hassle of cables. Furthermore, the AXT-240 supports multiple audio formats, ensuring compatibility with a wide range of digital media.

Battery life is another key characteristic of the Audiovox AXT-240. With an impressive battery performance, users can enjoy extended periods of playback on a single charge, making it an ideal companion for long trips, commutes, or outdoor activities. The device also features quick charging capabilities, minimizing downtime when power is needed.

Additionally, the AXT-240 is designed with user-friendliness in mind. Its intuitive interface includes simple controls that allow users to adjust volume, skip tracks, and manage calls effortlessly. The device's ergonomic design ensures comfort during extended use, making it suitable for individuals who engage in lengthy audio sessions.

Another technological highlight of the AXT-240 is its built-in microphone that enables high-quality hands-free calling. This feature enhances user convenience, allowing for easy communication while on the move, whether driving or multitasking.

In summary, the Audiovox AXT-240 stands out as a well-rounded audio device, blending advanced sound technology, user-friendly design, and practical features. Its commitment to providing quality audio experiences, combined with extensive connectivity options and durability, positions it as a worthy choice for audiophiles and casual listeners alike.
Top Page Image Contents