left attached to the player for an extended period, please recharge the battery at least once every two weeks.
4. Avoid unnecessarily recharging fully charged batteries.
Installing the Battery Pack:
1.First, make sure the player is in “Stop” mode and that the AC power supply has been disconnected.
2.Close the player cover.
3.Align the battery pack with the player module’s front edge.
4.Push the battery towards the rear of the player until it locks into position. The lock position is indicated by a click. The unit will fit snugly to the player.
BATTERY
Figure 44. Installing the DVD Player Battery
Removing the Battery Pack:
1.First, make sure the player is in “Stop” mode and that the AC power supply has been disconnected.
2.Press the release button in the down direction.
3.Slide the battery towards the front of the unit.
FRONT OF PLAYER
BATTERY
RELEASE BUTTON
Figure 45. Removing the DVD Player Battery
32
