Audiovox FP1210 user manual Connecting the TV / Monitor to an RCA device

Connecting the TV / Monitor to an RCA device

nConnect the supplied RCA Audio/Video signal cable as follows:

Yellow: Composite Video Out on your DVD, VCR etc. to the Composite VIDEO Input connector on the TV/Monitor.

White: Left Audio Output on your DVD, VCR etc. to the L AUDIO Input on the TV/Monitor.

Red: Right Audio Output on your DVD, VCR etc. to the R AUDIO Input on the TV/Monitor.

nConnect the small end to the power adapter to the DC 12V input on the back of the TV/Monitor. Connect the AC power cord to a suitable AC power wall socket.

Note: This monitor is set to operate using a 100-240 volt AC, +/- 10%, 50/60Hz power supply. If the voltage in your home is different from this, consult your dealer.

11