Note: before removing or installing the DVD module, unplug the unit from the AC power
source.
The supports to install the extended functional modules are located in two different positions (above
and to the side) and supports the installation of two functional modules at the same time. Please
follow the below steps to remove or install a function module.
Remove the DVD module:
Refer to the below figure and follow the steps to remove the DVD module from the unit:
Step 1: Open the back cover on the left rear panel of the unit.
Step 2: Remove the DVD module.
1. Loosen the screws on the DVD module.
2. Unplug the MGI connecting cord from the LCD TV.
3. Remove the DVD module.
Step 3: Close the back cover.
Installing the DVD module:
There are two different positions for installing the functional module, and two MGI jacks for
connecting the MGI connecting cord. Select the preferred position for installation:
1. Plug one end of the MGI connecting cord into the DVD module.
2. Open the back cover on the left rear panel of the unit.
3. Insert the functioning module and secure with one screw.
4. Plug the other end of the MGI connecting cord into the MGI jack on the unit.
5. Close the back cover.
- 12 -