Audiovox FR-142B, FR1428 manual Changing SNAP-ON Face Plate, Face Plate Mounting Screws

Your FR-1428 requires four “AAA” cells. Alkaline batteries will provide the best performance from your transceiver.

CAUTION: Incorrect battery installation can damage the unit.

Never attempt to charge alkaline batteries with the optional battery charger.

1.Lift and rotate belt clip counterclockwise (CCW) to the right to access battery cover.

2.Release battery cover latch and swing latch down; then lift the bottom of the battery cover and remove from the radio.

3.Insert four “AAA” alkaline batteries. Position batteries according to polarity markings. Reverse the procedure outlined in step 1 to reas- semble.

Note : Make sure the battery + and - terminals are aligned as shown.

CHANGING SNAP-ON FACE PLATE

FACE PLATE

FACE PLATE

MOUNTING

SCREWS

To change the snap-on face plate on the front of the unit, it is necessary to remove the battery compartment cover and batteries as previously described. Locate and loosen two screws on the upper part the battery tray.

-9-