LED Flashlight Button, Adjusting the Volume 10

GMRS1262 OPERATIONAL MODES

WEATHER BAND

GMRS/FRS BAND

CHANNEL

SELECT

WEATHER BAND

SELECT

NOTE: 1. To switch between GMRS/FRS and Weather Band modes, press and hold the Mode/WB button for 3 seconds. Refer to the appropriate section of this manual for detailed operating instructions for each mode.

2.To enter the VOX mode, press and hold the S/VOX button for 3 seconds.

Controls:

CHANNEL

SELECT

CTCSS

SELECT

POWER	(GMRS Channels
SELECT	Only)

VOX LEVEL

SELECT

DUAL

WATCH

BUTTON

BEEP

ROGER

BEEP

CALL

SELECT

LED Flashlight Button (16)

Press this button on the right side of the Transceiver to light the white LED (15) on top of the unit, thereby activating the built-in flashlight function.

Power On/Off/Keylock (13) Button

Momentarily press (about 1second) the power on/off button ( ). You will hear a dual beep to indicate the unit is on. Press the on/off button again for 2 seconds to turn the unit off. When the unit is on and the button is pressed for 3 seconds, the keylock icon ( ) will appear to confirm the MODE, SCAN and channel up/down buttons have been disabled.