Audiovox GMRS6000-2 owner manual Roger Beep Tone, VOX Selection Mode, Button Beep Key Tone

Roger Beep Tone

The Roger Beep is a tone which is automatically transmitted whenever the PTT button is released and the tone is enabled. This tone alerts the receiving party that the transmission has been terminated intentionally.

To enable and disable the Roger Beep tone:

-From GMRS standby mode, press the MODE Button 4 times (in FRS mode, 3 times) until the flashing Roger Beep icon ( ) appears with On or oF.

-Press the Up or Down Button to select the tone on or off as desired.

-When enabled, the tone icon ( ) appears steady on the display.

-Press the PTT button momentarily to confirm selection.

VOX Selection Mode

This option enables you to have hands-free conversation. When using the internal microphone/speaker or external microphone/headset (purchased separately), your voice or the signal is detected and the radio transmits and receives automatically. Your voice or nearby sound is detected and the radio transmits without the need to press the PTT button.

To set the radio for VOX operation:

-From GMRS/FRS standby mode, press and hold the MODE button for 3 seconds, or until the VOX icon appears on the display.

-To terminate VOX operation, press and hold the MODE button for at least 3 seconds; the VOX indication will disappear.

Button Beep (Key Tone)

This feature allows the transceiver to sound a confirmation tone whenever the following keys are pressed: Power On/Off/SCAN Button, Up/Down But- tons and MODE Button. This feature is always on.

16

128-7027

16 of 28