Audiovox HDTVlp owner manual Installation continued

HDTVlp

Installation (continued)

Attaching the Reflector to the Antenna

1.Starting from the right side, slide the Clip that is attached to the Reflector diagonally into the notch at the back of the Antenna. (see fig 4,5)

2.Once the Clip is pushed in, slide it to the side so that it forms a 90 degree angle to the Antenna's edge (see fig 6)

3.Repeat steps 1 and 2 for all four Clips

HDTVlp

Attaching the Antenna with Reflector to the Base

1.Route the 6' Mini Coax Cable through the Base and screw it securely to the Antenna

2.Slide the Antenna with Reflector onto the Base

3.Using a screw driver slightly tighten the 2 screws (see fig 7) to secure the Antenna to the Base

Fig. 7

Fig. 6

Connecting the HDTVlp

1.Connect the Mini Coax Cable that is attached to the Antenna to the Power Injector labeled "Antenna"

2.Connect the 2' Standard Coax Cable from the Power Injector labeled "TV" to your HDTV or Set-top box

3.Connect the 6' Standard Coax Cable from the Power Injector labeled "Power" to the

AC Adapter

4.Plug in the AC Adapter to a standard AC outlet

	6 Coax
	Cable
	A
	ENN
	ANT
	TV
2 Coax	POWER
Cable	A
	ENN
	ANT
	TV
	ER
	POW
Fig. 8

Attaching Rubber Feet to the Base

Remove the protective adhesive strip from the 4 rubber feet and apply them to the bottom of the antenna base.

34