INTRODUCTION
CONGRATULATIONS on your purchase of the the
Fig. 2
R
ration. This
SPECIAL FEATURES
Dual Channel.
Automatic Level Control prevents input signal over loading.
Uses high frequency infrared light to assure a clean signal for clear reception.
EXPLANATION OF CONTROLS (Fig. 1)
Infrared Transmitter
Headphone Receivers
1.INFRARED PICKUP SENSORS – Receives signals from transmitter.
2.BATTERY COVER
3.VOLUME CONTROL
4.POWER SWITCH
5.POWER INDICATOR LED
6.Channel A/B Switch
7.AUTO ON/OFF MICRO SWITCH
L1 
6
2
5
3
4
7Auto ON/OFF
Micro Switch is activated when headphones are placed on head
BATTERY INSTALLATION (Fig. 2)
1.Place two alkaline AAA batteries in the Headphone’s battery compartment making sure that the battery polarity is correct.
2.Replace the batterycover
Operation
Please Read Carefully to Prevent Damage to your Ears:
1.Be sure batteries are properly installed in the headphones.
2.Turn the headphone volume nearly off before turning on the power. Turn on the headphone
power then increase the headphone volume to a comfortable level. You can increase the source audio volume if necessary (when connected to a variable audio source such as a headphone source).
3.Before switching between channels A and B, remove headphones and turn the volume set ting to a low setting as it is possible that the signal of channel could be louder than the other.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Product Specifications: Operating range: up to 25 Ft. Frequency Response: 35 – 18,000 Hz S/N ratio: 60 dB
Channel Separation: 45 dB
