Audiovox IRHS40 warranty Fold, Lr

Fold Fold

INTRODUCTION

CONGRATULATIONS on your purchase of the sophisticated, high-tech, Automotive Infrared Stereo Headphones from Audiovox Corporation . These Headphones free you from the tangle of headphone wires and lets you enjoy music or video without the tangle of cables around you. To ensure the best performance of your Headphones, please read this manual carefully.

These Headphones are designed to be used with the Transmitter provided with the Audiovox Model WHS100 Infrared Stereo Headphone System, or VOH6XX series of flipdown pods.

SPECIAL FEATURES

High Performance 40mm Driver.

Automatic Level Control prevents input signal over loading.

Uses high frequency infrared light to assure a clean signal for clear reception.

Adjustable Headphone Band

Auto shutoff after 3 minutes of no Audio Signal.

EXPLANATION OF CONTROLS (Fig. 1)

Headphone Receivers

1.INFRARED PICKUP SENSORS – Receives signal from transmitters

2.BATTERY COVER

3.VOLUME CONTROL

4.POWER SWITCH(PUSH ON/OFF)

5.POWER INDICATOR LED

Fig. 1

LR

1

2 5

4

3

BATTERY INSTALLATION (Fig. 2)

1.Place two alkaline AAA batteries into the battery compartment of the Headphones(s), making sure that the battery polarity is correct.

2.Replace batterycover.

OPERATION

Please Read Carefully to Prevent Damage to the Headphones or your Ears:

1.Be sure batteries are properly installed in the headphones.

Fig. 2

2.Turn the headphone volume nearly off before turning on the power. Turn on the headphone power then adjust the headphone volume louder to a comfortable level (You can adjust the audio source volume louder if needed, if connected to a variable audio source, such as a headphone source).

WARNING: Changes or modification to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.

Product Specifications: Operating range: up to 25 Ft. Frequency Response: 35-18,000 Hz S/N ratio: 60 dB

Channel Separation: 45 dB

Fold Fold