Revision C
3/2001
(B) To tune to weak or marginal channels with the CHANNEL UP/DOWN buttons, press the
SKIP/SEARCH button on the Remote Control Unit until “SKIP MODE OFF” is displayed on the
bottom of the screen. Tune to the desired channel using the CHANNEL UP/DOWN buttons or go
directly to the channel by using the 0-9 buttons on the Remote Control.
3. To ERASE a channel, press the ERASE/WRITE button on the Remote Control Unit until “MANUAL
MEMORY XX ERASE” is displayed on screen. To STORE a channel, press the button until the
MANUAL MEMORY XX ADD is displayed on screen.
Note: Please refer to page 2 for more information on TV reception.
1. Sliding the screen release lock forward will unlock the LCD screen and it will drop down slightly.
(Pivot the screen downward until a comfortable viewing angle is reached). After the unit has been
turned on and displaying a picture, adjustment to the viewing angle can be made by pivoting the
screen to optimize the picture quality. The internal friction detent will hold the screen in position while
the system is in use.
2. Pressing the power button on the pod or remote will alternately turn the system on or off. When in
use the internal back lighting will illuminate the controls.
3. Remember to turn the unit off and pivot the LCD to the locked position when not in use.