TROUBLESHOOTING
Remedy:
-Verify +12 VDC on Red wire at 7 pin Harness behind video
monitor. Verify ground connection with continuity test from
known good ground to black wire at 7 pin Harness
-Verify that the correct source is selected (i.e.: 1,2,3 or 4).
Verify that the source is on and playing a known good media
(such as a videotape). Verify connections at both ends of the
source component harness. Verify that the Gray wire is
connected to the Emergency Brake wire.
-Check batteries in the hand held remote.
Symptom:
No power at Video Monitor
Power but no video or sound
No Infrared Remote Functions
8