adjust the treble response as desired. The treble level will be shown on the display panel from a minimum of -7 to a maximum of 7 (0 is flat response). The display will automatically return to the normal indication 5 seconds after the last adjustment or when another function is activated.
6LEFT/RIGHT BALANCE CONTROL
To adjust the left-right speaker balance, first select the Balance mode by pressing the Select button 3so that the “bAL” indication appears on the display panel. Within 5 seconds of choosing the Balance mode, press the + side of the Level Control 2 to adjust the stereo balance to the left channel speakers or the - side to adjust it to the right channel speakers. When the volume level between the right and left channels is equal, “0-0” will be shown on the display panel. Adjusting the balance toward the right will increase the number on the right side of the display to a maximum of “0-9” (full right). Adjusting the balance toward the left will increase the number on the left side of the display to a maximum of “9-0” (full left). The display will automatically return to the normal indication 5 seconds after the last balance adjustment or when another function is activated.
7FRONT/REAR FADER CONTROL
To adjust the front-rear speaker balance, first select the Fader mode by pressing the Select button 3 so that the “FAd” indication appears on the display panel. Within 5 seconds of choosing the Fader mode, press the + or the - side of the Level Control 2 to adjust the front-rear speaker levels as desired. When the level of the front and rear speakers is equal, “”0-0" will be shown on
the display panel. Adjusting the fader toward the front speakers will increase the number on the left side of the display to a maximum of “9-0” (full front). Adjusting the fader toward the rear speakers will increase the number on the right side of the display to a maximum of “0-9” (full rear). The display will automatically return to the normal indication 5 seconds after the last fader adjustment or when another function is activated.
8AM/FM BAND SELECTOR (BND) AUTO-STORE TUNING (AS)
During radio operation, each momentary press of this button will change the radio band. The indication “AM”, “FMI”, or “FMII” will appear on the display panel according to your selection.
Pressing and holding the button for longer than 2 seconds will activate the Auto-Store Tuning function which will automatically scan the AM or FMII bands and enter strong stations into the pre-set memory positions for that band. If you have already set the pre-set memories on the AM or FMII bands to your favorite stations, activating the Auto-Store feature will erase those stations and enter new ones. This feature is most useful when travelling in a new area where you are not familiar with the local stations.
9MANUAL UP/DOWN TUNING (TUN+ / TUN-)
AUTOMATIC SEEK TUNING
Each time the + side of the button is tapped, the radio will tune one frequency step higher. Similarly, each tap of the - side of the button will tune one frequency step lower. To manually tune in a station, tap the button of the appropriate direction until the desired frequency is reached.
